Yes it is possible... First, in your drawing, anything that is in color will be copper. You could just make the drawing in black and no fill. Save it as a SVG file. In FZ core parts at the bottom, where the section is listed as PCB View, drag the Silkscreen Image on to the board. (it will be a FZ logo). In the Properties section of the Inspector, click "load image file", and select you the graphics you just created (your image will replace the FZ logo). In the Inspector click on the combobox by PCB layer and select "copper top" and your silkscreen logo will be moved to the top copper layer turn to copper. In the PCB View drag the via on the your board and place it your logo. Note: If the board fabricated by a fab house then the logo will be covered with solder mask.
↧