Problem #1
After having lost my simple circuit design i have now redone it from start.
I exported it as a JPG and printed it out using my Brother HL-2270DW printer on plain paper.
As the density of the Black print was not good enough I suspected a problem with my printer and/or laser-cartridge, so I checked the print quality using my wordprocessor and printed a document and it was 100%. The print was perfect and dark confirming that the problem was with my Fritzing settings.
Problem #2
Attached is an enlarged printout of my circuit
The problem that I have at the moment is that my pcb exported for PCB as an Etchable JPG for production and make a test print on Plain Paper it's not dark enough.
The fault is not with my printer or Laser cartridge as all other documents print out very dark.
How do I get Fritzing to print out darker?
My PCB is saved on my computer but I do not know how to include it in tis e-mail
FlySparkV2 15 Aug 2016_etch_copper_bottom_etch_copper_bottom.pdf
I am an old (70+ years) & have not done any electronics for the last 20 years.
Now a newbie struggling with both Ubuntu Linux and Fritzing. and assistance is greatly appreciated.
Thanks for any assistance.
Syd