Yes, it does appear to be missing a 500 ohm resistor (which is an odd value, by the way 470 ohms would be the standard value, you would need a 1% resistor to get 500 ohms I expect.) You need to drag one in which you appear to know how to do and connect it where the schematic tells you it needs to connect (there is nothing currently there.) The two ends of the resistor need to connect as the schematic says they should. As well you need to replace the two blue capacitors with two that look like this:
These ones are polarized so you have to connect them the correct direction as well (otherwise they burn up usually.) With the addition of the last resistor, it looks correct to me, although the best way to check that is to then route schematic view and see if the Fritzing schematic matches the provided schematic. Good luck!
Peter