Schematic to breadboard layout

Thank you so much this has helped massively! I am using these push buttons, the only thing is they have 4 pins instead of 2 like the bread board has. I'm only using these to test first

Push-Button-Switch.jpg600x600 33.9 KB

This is the arduino code that I am wanting to run, obviously with the things on the left hand side of the original schematic I uploaded like the screen.

[#include
SoftwareSerial midi(8,7); ///RX TX

int clearbtn = 14;
int recordbtn = 2;
int stopbtn = 3;
int track1btn = 5;
int track2btn = 6;
int track3btn = 11;
int modebtn = 4;
int undobtn = 13;
int led = 9;

int toggle1 = 0;
int toggle2 = 0;
int toggle3 = 0;
int toggle4 = 0;
int toggle5 = 0;
int toggle6 = 0;
int toggle7 = 0;
int toggle8 = 0;

int mode = 0;

void setup(){
pinMode (clearbtn, INPUT_PULLUP);
pinMode (undobtn, INPUT_PULLUP);
pinMode (recordbtn, INPUT_PULLUP);
pinMode (stopbtn, INPUT_PULLUP);
pinMode (track1btn, INPUT_PULLUP);
pinMode (track2btn, INPUT_PULLUP);
pinMode (track3btn, INPUT_PULLUP);
pinMode (modebtn, INPUT_PULLUP);
pinMode (undobtn, INPUT_PULLUP);
pinMode (led, OUTPUT);
digitalWrite(led, HIGH);
delay(250);
digitalWrite(led, LOW);
delay(250);
digitalWrite(led, HIGH);
delay(250);
digitalWrite(led, LOW);
delay(250);
digitalWrite(led, HIGH);
delay(250);
digitalWrite(led, LOW);
delay(250);

midi.begin(31250);
}

void loop(){

if (digitalRead(undobtn) == LOW && toggle1 == 0){
toggle1 = 1;
if(mode == 0){
midi.write(0x90);
midi.write(0x41);
midi.write(0x01);
// delay(300);
}

if(mode == 1){
  midi.write(0x90);
  midi.write(0x36);
  midi.write(0x01);
  // delay(300);
}

}

if (digitalRead(undobtn) == HIGH && toggle1 == 1){
toggle1=0;
if(mode == 0){
midi.write(0x90);
midi.write(0x41);
midi.write((byte)0x00);
delay(300);
}

if(mode == 1){
  midi.write(0x90);
  midi.write(0x36);
  midi.write((byte)0x00);  
  delay(300);
}

}

if(digitalRead(clearbtn) == LOW && toggle2 == 0){
toggle2 = 1;
if(mode == 0){
midi.write(0x90);
midi.write(0x01);
midi.write(0x45);
//delay(300);
}
if(mode == 1){
midi.write(0x90);
midi.write(0x37);
midi.write(0x45);
//delay(300);
}
}

if(digitalRead(clearbtn) == HIGH && toggle2 == 1){
toggle2 = 0;

if(mode == 0){
  midi.write(0x90);
  midi.write(0x01);
  midi.write((byte)0x00);
  delay(300);
}
if(mode == 1){
  midi.write(0x90);
  midi.write(0x37);
  midi.write((byte)0x00);
  delay(300);
}

}

if(digitalRead(recordbtn) == LOW && toggle3 == 0){
toggle3 = 1;
if(mode == 0){
midi.write(0x90);
midi.write(0x10);
midi.write(0x45);
//delay(300);
}
if(mode == 1){
midi.write(0x90);
midi.write(0x35);
midi.write(0x45);
// delay(300);
}
}

if(digitalRead(recordbtn) == HIGH && toggle3 == 1){
toggle3 = 0;
if(mode == 0){
midi.write(0x90);
midi.write(0x10);
midi.write((byte)0x00);
delay(300);
}
if(mode == 1){
midi.write(0x90);
midi.write(0x35);
midi.write((byte)0x00);
delay(300);

}

}

if(digitalRead(stopbtn) == LOW && toggle4 == 0){
toggle4 = 1;
///Serial.println("mute/stop");
if(mode == 0){
midi.write(0x90);
midi.write(0x07);
midi.write(0x45);
//delay(300);
}
if(mode == 1){
midi.write(0x90);
midi.write(0x34);
midi.write(0x45);
//delay(300);
}
}

if(digitalRead(stopbtn) == HIGH && toggle4 == 1){
toggle4 = 0;
if(mode == 0){
midi.write(0x90);
midi.write(0x07);
midi.write((byte)0x00);
delay(300);
}
if(mode == 1){
midi.write(0x90);
midi.write(0x34);
midi.write((byte)0x00);
delay(300);

}

}

if (digitalRead(track1btn) == LOW && toggle5 == 0){
toggle5 = 1;
if(mode == 0){
midi.write(0x90);
midi.write(0x14);
midi.write(0x01);
// delay(300);
}
if(mode == 1){
midi.write(0x90);
midi.write(0x33);
midi.write(0x01);
// delay(300);
}
}

if (digitalRead(track1btn) == HIGH && toggle5 == 1){
toggle5 = 0;
if(mode == 0){
midi.write(0x90);
midi.write(0x14);
midi.write((byte)0x00);
delay(300);
}
if(mode == 1){
midi.write(0x90);
midi.write(0x33);
midi.write((byte)0x00);
delay(300);
}
}

if (digitalRead(track2btn) == LOW && toggle6 == 0){
toggle6 = 1;
if(mode == 0){
midi.write(0x90);
midi.write(0x15);
midi.write(0x01);
// delay(300);
}
if(mode == 1){
midi.write(0x90);
midi.write(0x32);
midi.write(0x01);
// delay(300);
}

}

if (digitalRead(track2btn) == HIGH && toggle6 == 1){
toggle6 = 0;
if(mode == 0){
midi.write(0x90);
midi.write(0x15);
midi.write((byte)0x00);
delay(300);
}
if(mode == 1){
midi.write(0x90);
midi.write(0x32);
midi.write((byte)0x00);
delay(300);
}
}

if (digitalRead(track3btn) == LOW && toggle7 == 0){
toggle7 = 1;
if(mode == 0){
midi.write(0x90);
midi.write(0x16);
midi.write(0x01);
// delay(300);
}
if(mode == 1){
midi.write(0x90);
midi.write(0x31);
midi.write(0x01);
// delay(300);
}
}

if (digitalRead(track3btn) == HIGH && toggle7 == 1){
toggle7 = 0;
if(mode == 0){
midi.write(0x90);
midi.write(0x16);
midi.write((byte)0x00);
delay(300);
}
if(mode == 1){
midi.write(0x90);
midi.write(0x31);
midi.write((byte)0x00);
delay(300);

}

}

if (digitalRead(modebtn) == LOW && toggle8 == 0){
toggle8 = 1;
if(mode == 0){

  midi.write(0x90);
  midi.write(0x17);
  midi.write(0x01);
  // delay(300);
}

if(mode == 1){


  midi.write(0x90);
  midi.write(0x30);
  midi.write(0x01);
  //  delay(300);
}

}

if (digitalRead(modebtn) == HIGH && toggle8 == 1){
toggle8 = 0;
if(mode == 0){
mode = 1;
midi.write(0x90);
midi.write(0x17);
midi.write((byte)0x00);
digitalWrite(led, HIGH);
delay(300);
}
else if(mode == 1){
mode = 0;
midi.write(0x90);
midi.write(0x30);
midi.write((byte)0x00);
digitalWrite(led, LOW);
delay(300);
}

}
}