I think you will need to measure a real part, there doesn't seem to be enough of a pdf to specify what you want, because that isn't the intended use of the sockets. You may or may not, depending on your application specifics, which we don't know, need to worry about mechanical stability. The connectors look to be quite bulky and there is a good change that they will rip out of the board if you don't supply strain relief somehow (solder is not mechanically strong). Having the connectors mounted in a hole on a metal panel with wires that connect to a small board that in turn connects to a header to the micro may be the best mechanical solution (or may not if size or some other consideration is in play).
Peter