In another link, I posted info on the sdCard Adapter I use (senmod sdhc adapter). I’ve used them enough now that I decided to make a ‘Part’ for it.
Info:
• I like big pads so, the pads are for my preference and my cause you DRC errors (depending upon your DRC settings). My DRC settings are for 0.010 inch Keepout to avoid error. (FYI - you can ignore these errors and export the gerbers).
• I prefer to lay the adapter parallel with the PCB using a 90º Pin Header. Therefore, in the PCB layout, the Pin’s are reversed and enclosed in a dashed box. The Breadboard and Schematic views are as normal. As there are no internal connections, you can ignore pin labels and hook-up as you prefer. Of course, you don’t need to lay it parallel to PCB - your preference…
• I also prefer larger text so the pin#'s are readable.
my_sdCard.fzpz (10.5 KB)