Thank you for the explain, i need round connections on my pcb for soldering wires to like vcc , gnd , and so on without screw mounting or similar the only problem is it is very confuseing when you have more than 10 via without shematic plan, i need no connecting top to bottom i only need soldering points with connection in shematic. show you picture attached. you can see on the left and the right side many solder points thats what i need.
I found a Rf Link in the parts from fritzing but my problem is the module i used is a little bit bigger and the connections are not the same thats why i want to adjust it in the part editor but i have no luck 
i attached the rf modul i need look at the picture.
regards from germany