Thanks again. But what do you need me to export from the parts bin? I
have created (so far) 2 headers with the pinouts labeled - a 10 pin and an
8 pin.
I was thinking you wanted my pcb board layout - the x,y co-ords I was
quoting are on the board layout - i.e the positions of the two headers. My
assumption was that the y position of the two should be identical and I
should be able to calculate the x position difference to be sure I get the
0.150 spacing from the 8 pin to the 10 pin.
I do lots of 3-d cad work - this is my first fritzing project. I’ve taken
the pcb board all the way thru - but realised I had not allowed for 12v in
and so have started again - this time trying to make sure I clean up all
issues as I go…
thx
Mike