Night Security Light Working Problem
int relay = 8; volatile byte relayState = LOW; int PIRInterrupt = 2; // LDR pin is connected to Analog 0 int LDRPin = A0; // LDR value is stored on LDR reading int LDRReading; // LDR Threshold value...
View ArticleClik here to view.
Night Security Light Working Problem
I applied the code & cct diagram as in the below link but the concept of night security light did not work. Plz, I need a help for this project. Arduino Project Hub PIR Night Security Light This...
View ArticleNight Security Light Working Problem
As I said you need to upload the .fzz file of the sketch in Fritzing to do much with this. The most likely answer is that something is wired wrong but it is impossible to tell without the sketch that...
View ArticleNight Security Light Working Problem
Night Security Light Project By Hussein Ali Shakir.fzz (41.5 KB)
View ArticleNight Security Light Working Problem
Find this above fritzing file for your request & the below is the code int relay = 8; volatile byte relayState = LOW; int PIRInterrupt = 2; // LDR pin is connected to Analog 0 int LDRPin = A0; //...
View ArticleWhy is Information getting lost when exporting as SVG?
Thank you, is this the correct format? ShowboxInterceptorFor3DCase.fzz (195.5 KB) I’m not really sure if I’m doing this correctly because when I save, Fritzing doesn’t automatically add the fzz...
View ArticleClik here to view.
Night Security Light Working Problem
You have a variety of problems. The main one is the relay part is broken, but there are a variety of other issues as well. Here (circled in red) there is a missing connection (indicated by the rats...
View ArticleClik here to view.
Arduino MIDI Shield (with MIDI Through)
Name of the part Arduino MIDI Shield (with In, Out and Through) Previous work, similar parts The Sparkfun MIDI Shield is similar, but is lacking the MIDI Through port and has a slightly different...
View ArticleClik here to view.
Night Security Light Working Problem
Thanks a lot Peter for your deep clarification & support in fritzing. So, what do you think practically problem with the real cct shown in pic plz. As I connect them accurately as it is but did...
View ArticleClik here to view.
Why is Information getting lost when exporting as SVG?
Yes that is the correct format, although Fritzing should be adding the .fzz to the file (it does for me on Windows at least!) Indeed the Adafruit part is incorrectly configured and thus won’t export...
View ArticleNight Security Light Working Problem
It is hard to say because I don’t know what the code is supposed to do. The I/O pin definitions look correct to me, they appear to match the physical connections in the sketch so if the original code...
View ArticleClik here to view.
Arduino MIDI Shield (with MIDI Through)
It is easy enough to create a part from the jpg images available, but the part that is currently missing is what the bottom two rows of connectors do. I expect the second one is probably ground, and...
View ArticleClik here to view.
Why is Information getting lost when exporting as SVG?
Thank you, this actually fixed it! I could not import the part directly though because I’m getting the error that it already exists. So I traced down the location of the SVG images and replaced those...
View ArticleClik here to view.
Why is Information getting lost when exporting as SVG?
felic: Thank you, this actually fixed it! I could not import the part directly though because I’m getting the error that it already exists. That is the expected response (because it is correct.) That...
View ArticleClik here to view.
Grandezza max. piste in Mils?
Nope. The maximum is 255mils: edit: Actually I appear to be wrong. The max is in fact 999mils: Peter via google translate: No. Il massimo è 255mils: modifica: In realtà mi sembra di sbagliarmi. Il...
View ArticleWhy is Information getting lost when exporting as SVG?
I couldn’t find a way to turly delete the part from the UI directly. At some point I just imported the entire Adafruit library from Github and there doesn’t seem to be an option to get get rid of them...
View ArticleClik here to view.
Why is Information getting lost when exporting as SVG?
I don’t think I have ever tried to delete a file from a bin import (nor delete the bin for that matter.) It is possible there is a bug there because you should be able to update just one element in a...
View Article