First time making a PCB. Does this look alright?
Your best bet would be to upload the sketch (the .fzz file) as pictures are pretty much useless in evaluating your circuit. Peter
View ArticleFirst time making a PCB. Does this look alright?
wrong version. (pardon me.) GALE ECU-JL.fzz (193.5 KB)
View ArticleClik here to view.
First time making a PCB. Does this look alright?
Which illustrates my point that pictures are basically useless. The sketch allows running DRC (routing->Design Rules Check (DRC) which flags a bunch of errors: this one does show up in your images...
View ArticleFirst time making a PCB. Does this look alright?
Huh thought it was just drc freaking out. You think this will affect manufacture?
View ArticleFirst time making a PCB. Does this look alright?
Also I’m running an old beta version of fritzing and none of these errors popped up ://. Also other than these any other issues like if the traces are at the right pins or if there are any other...
View ArticleFirst time making a PCB. Does this look alright?
Yes. The first overlap shorts many of the I/O pins on the micro and that will likely be a problem. The too close ones may or may not be an issue and the board house may or may not flag it as an error...
View ArticleFirst time making a PCB. Does this look alright?
GALE ECU.fzz (183.4 KB) Hope there is nothing else of note…
View ArticleClik here to view.
First time making a PCB. Does this look alright?
Still problems. The rectifier ones will probably work fine, but the new part will remove them. there is a hole hidden by the silkscreen layer that is too close there and likely truncating the trace at...
View ArticleClik here to view.
First time making a PCB. Does this look alright?
ECU Unit.fzz (183.6 KB) Take your time on looking at it
View ArticleFirst time making a PCB. Does this look alright?
OK, here is a fixed version that passes DRC. I substituted my corrected rectifier to get that out of the way, but the case is a little too large according to the data sheet. Then I moved some of the...
View ArticleFirst time making a PCB. Does this look alright?
Thanks for the help :DD you’re a real one. Though the rectifiers and capacitor doesn’t seem to be hooked up in the way I intended. I’ll fix that tho.
View ArticleClik here to view.
First time making a PCB. Does this look alright?
They look to be electrically equivalent. Here I right click on a pin and all the pins connected to that net light yellow the path circled in red can be simplified like this (the line circled in green...
View ArticleHLK-LD2410 24Ghz Human Presence Body
Hi Peter, Thank you. This part is perfect for what I need. The pin numbers is the the only thing that must change (Not names). Pin 1 is on Tx. This may only be confusing on PCB layout with the square...
View ArticleHLK-LD2410 24Ghz Human Presence Body
I can reassign the pin numbers in the parts editor with the set graphic button, but don’t know how to change the number text next to the pin in the Schematic view. I also played with that niggly...
View ArticleClik here to view.
First time making a PCB. Does this look alright?
I see. Probably just me it probably was the way some traces converged that lead me to believe something was up. It should be working the same way. I changed some stuff around kinda felt like it but...
View ArticleClik here to view.
LM2596HV-based AC/DC to DC Buck Step Down Converter Module
Name of the part LM2596HV-based AC/DC to DC Buck Step Down Converter Module Previous work, similar parts There is an old part based on the LM2596 (not LM2596HV): fritzing/LM2596 step down module.fzpz...
View Article