Roland TR-808 Bass Drum Breadboard Project
Would this be an example of what is needed to power this ? http://www.getfpv.com/12v-step-up-voltage-regulator.html Sorry to ask but why can I not power it using a wall/D.C. Adapter 12VDC ?
View ArticleClik here to view.
Roland TR-808 Bass Drum Breadboard Project
j303: Would this be an example of what is needed to power this ? http://www.getfpv.com/12v-step-up-voltage-regulator.html Not exactly, it will only provide one half of what you need. There are a...
View ArticleRoland TR-808 Bass Drum Breadboard Project
I see, perhaps then this one!!? adafruit.com Switching Split Power Supply ± 12V 500mA Split Supply ID: 2591 - $14.95 :... I know you just did a double take when looking at this power supply, what's up...
View ArticleRoland TR-808 Bass Drum Breadboard Project
Yes, good find! This is exactly what you want. Didn't show up on any of the google searchs I did. I'll have to remember this in case I need one sometime. Peter
View ArticleRepetitive downloads don't work on Win10
There were reports of anti-virus stripping file when 9.3 came out, but that was for the install not working.I also remember a W10 problem were some updates stopped FZ, but I think that was install as...
View ArticleNodeMcu V3 parts library
Hi Peter, I've fixed the schematic SVGs. I've also added connectorXterminal to the moisture sensor breadboard, but it's not...
View ArticleClik here to view.
Roland TR-808 Bass Drum Breadboard Project
Hi J303 If you fancy building your own split supply you can take a look at this (I've designed this layout and built it. I use it for my modular synth): :12V Rack Power_1.02.fzz (55.9 KB) It is based...
View ArticleClik here to view.
Roland TR-808 Bass Drum Breadboard Project
Is there no way to make this work from 9V batteries? How does Eric Archer make the Andromeda Space Rocker? It seems this whole circuit should be able to run off of two 9V batteries....
View ArticleRoland TR-808 Bass Drum Breadboard Project
As long as it will run on +/-9V (which the second article seems to indicate it will) then 2 9V batteries connected as in noodleDriver's Split Supply Concept drawing should work just fine. Won't hurt...
View ArticleNodeMcu V3 parts library
As well as the svg you need to add the terminal definition to the fzp file as well, the three connector lines in breadboard need to change from this: <breadboardView> <p svgId="connector9pin"...
View ArticleClik here to view.
Mini-360 DC-DC Buck converter part request
Hi,I am newbie in Fritzing. Can anyone help or suggest me to make part of Mini-360 DC-DC Buck converter (like in the links below) https://solarbotics.com/product/40410/ banggood.com Mini DC Adjustable...
View ArticleMini-360 DC-DC Buck converter part request
I don't have this exact one, but I have ones that are similar. If you can provide the dimensions I can likely adapt another part. The board outer dimensions are listed in one of the posts, but whats...
View ArticleMini-360 DC-DC Buck converter part request
Hi Peter, Thank you so much for your reply. Actually, I bought the module from AliExpress...
View ArticleClik here to view.
Mini-360 DC-DC Buck converter
Mini-360 DC-DC Buck converter available for ebay and other such sources. A tiny ((17mm by 11mm) buck converted module that will do around 2Amps with an adjustable output. All three views present, but...
View ArticleClik here to view.
Mini-360 DC-DC Buck converter part request
They are available from all over . Turns out I saw them last night while ordering more of the +-12v modules that I made the part for yesterday and ordered some. Won't be here for a month or so but...
View ArticleMini-360 DC-DC Buck converter part request
Thank you very much again, Peter. I'll test it and report the result soon.
View ArticleWhat is the license of work greated with Fritzing?
Can I use the PCB made by Fritzing to grant my own licence, such as robot controller board, and produce it for selling?
View ArticleRoland TR-808 Bass Drum Breadboard Project
2 Batteries will work just fine and will not hurt anything in your circuit but as they loose charge the voltage will drop and maybe make it sound a bit different ie drop in volume or some minor thing....
View ArticleClik here to view.
Can't seem to bring LEDs to front
When I select an LED, then right click and choose Raise and Lower -> Bring to Front, the wires on the breadboard still appear over top of the LEDs. I've also tried lowering the wires to the Back,...
View Article