NodeMcu V3 parts library
Hi Peter, with the current PCB layout, the parts are facing the backside of the NodeMCU board. I prefer the parts facing the outside, necessitating the mirror image of the PCB board. Currently, I have...
View ArticleThere is no FC-51 IR obstacle sensor?
I genuinely have to ask why one would need this in the library. If I was making a PCB that needed this attached to it I would use a simple 3 pin header. Am I missing something here?
View ArticleClik here to view.
There is no FC-51 IR obstacle sensor?
Spoken like someone who uses fritzing only for pcb's , I usually use it for breadboard view for documenting projects on perf board and documenting the connecting together of modules like this one. So...
View ArticleObstacle avoidance IR Sensor module for fritzing
Thanks Peter, very much appreciated.Now I can start working on my fritzing moduleAgain, many THANKSLloyd
View ArticleClik here to view.
NodeMcu V3 parts library
Luckily I resisted the temptation to say this will be done in about 15 minutes, because while your requested change is trivial and only took 15 minutes, when I tested it I discovered that the base...
View ArticleFont error in parts editor when reading schematic svg which is edited with...
I received this error and did some investigation. Fritzing has various font handling workarounds for SVGs. It does handle font-family defined inside the style attribute; however, it doesn't handle a...
View ArticleFinal review before ordering
Peter and others - Sorry for the delay in responding to your comments ... much appreciated. I have been doing my homework on "divider circuits", KVL and my understanding of transistors and just...
View ArticleClik here to view.
Final review before ordering
Not quite right yet, your led / buzzer circuit needs to look like this: led_driver_schem.png492x630 18.8 KB As your circuit stands there isn't a ground return path for the emitter and no current...
View ArticleClik here to view.
Final review before ordering
Peter - It is becoming clearer I think. If you look at the notes I have on the schematic, perhaps you can critique my logic and see if I am understanding the process. You will see that I am trying to...
View ArticlePCB to 3D Printed Cases
I've been working on a project that encompasses the following parts, PaPiRus 2" screen, RPi Zero v1.3, Adafruit Powerbooster 1000c and a 1200 mAh battery. I is a bit of a thick bundle and I'm looking...
View Articlehttp://brandsair.com/Home/Brand
In order to find a best business consultant in United States online for opening new firm, you can consult with Brands Air, backed by a trusted pool of business consultant. Check out their website that...
View ArticleSocial Networking Web Design
Nettechnocrats is specialised in providing one of the latest additions to the web designing is the social networking website design.Social networking being one of the most popular platforms for...
View ArticleClik here to view.
Font error in parts editor when reading schematic svg which is edited with...
Hi Historic_bruno. Thank you for your hard work. Now I'm looking foward to the next update. By the way,I have tried deleting all 'px' units in 'style' elements from the SVG file with text-editor. When...
View ArticleClik here to view.
Question on caps
Hi. I've checked the tutorials and parts help, but am slightly confused. Most of the caps have a TON of variations, but I can't relate those to common parts sites, such as Mouser. For example, I'm...
View ArticleQuestion on caps
In general caps are generic. Once you drag it on to the sketch, then Inspector (lower right pane) will let you select things like value, voltage, and package. From the 3.5mm I'm guessing the cap is...
View ArticleClik here to view.
Final review before ordering
jbund65: This is my logic:From your schematic, it seems that the only purpose of the D4 output pin is to "close the gate" of the transistor. Simply provide a path from IO pin to transistor base, and...
View ArticleQuestion on caps
Sure, I get that, but you mention "you need to know what package it is" ... where do you get that info??? I'm looking at the data sheet and it's not there. I'm asking specifically what is...
View ArticleClik here to view.
4x5 Key switch pad with LEDs (YL-4)
Thanks Peter. I initially said I would spend little time in the parts editor but now I find that is sometimes the best solution, so I think I will invest some time learning how to do so. I've read the...
View Article