Api-ms-win-crt-runtime-l1-1-0.dll Fix?
With this you still get the missing dll error? If so that would indicate you either need the 2015 version for some reason, although from what I have read the 2017 version is supposed to be compatible...
View ArticleClik here to view.
Api-ms-win-crt-runtime-l1-1-0.dll Fix?
Here it is… I reproduced the error on top of our messages to see it is not something old… er.jpg1147x651 275 KB
View ArticleApi-ms-win-crt-runtime-l1-1-0.dll Fix?
Well this is a new one. Unfortunatly I don’t have an answer. I just built a development disk with Qt and Visual Studio which is using the 2017 Redistibutable. I just deleted the 2005 and 2013 versions...
View ArticleClik here to view.
Api-ms-win-crt-runtime-l1-1-0.dll Fix?
A new one? But -I guess- it is exactly the same problems that others were having in the beginning of this discussion, and this is why I posted here! I do not see any difference… Please have a look at...
View ArticleApi-ms-win-crt-runtime-l1-1-0.dll Fix?
It is a new one in that loading the runtime libs hasn’t fixed the problem. In all previous cases I know of (unless some people just gave up, which is possible) loading the runtime libraries has fixed...
View ArticleClik here to view.
Cooper drilling question
Hi Folks I’m a newbie with a few successful home-etched boards under my belt, but have a question about drilling with respect to copper placement. For reasons I don’t understand, sometimes my top and...
View ArticleClik here to view.
Cooper drilling question
It looks like your problem is that you have extended the trace too far. It is possible (although somewhat difficult) to terminate the trace on the far edge of the pad rather than the near edge. If you...
View ArticleCooper drilling question
Although I agree with what @Vanepp said it actually looks like an issue with the math used for the connection of curved traces. As soon as you curve a trace it connects past the center hole. This...
View ArticleCooper drilling question
I guess another solution would be to not use curved traces and only use 45 degree corners.
View ArticleCooper drilling question
Hi. Yes, tests confirm, if I stick to 45 degree lines then it always terminates with hollow blobs. Thanks!
View ArticleCooper drilling question
More testing. It’s any curve which leads to the solid blob. Any angle straight line results in a hollow blob. Thanks again everyone
View ArticleClik here to view.
Random pad like thing appears in the gerber viewer
Hello people, I have a problem with my board. I want to get my board fabricated but when I uploaded my sketch on www.aisler.net, a pad (not really, it is a region where there is no solder mask and the...
View ArticleRandom pad like thing appears in the gerber viewer
Did you upload the Fritzing sketch to Aisler or did you export the Gerber files and then upload a zip of them? If you uploaded the sketch could you try exporting the gerbers and zipping them and...
View ArticleClik here to view.
Ground Fill with gap lines
Hello every one! i am workin with fritzing just a few days. I did advance good until now, but i am stucked with my ground fill. i did it and there are some line gaps in the ground fill. Someone knows...
View ArticleGround Fill with gap lines
Those are how Fritzing creates the ground fill. Frizing intersects lines with the other copper areas. I have never home etched a PCB from Fritzing but I can say they never show up in a professionally...
View ArticleGround Fill with gap lines
I understand… but my concer is because the image was generated in PDF to print… and the gaps are there… but i will give a try… how do you print your bords? Do you use any othe program to this?
View ArticleGround Fill with gap lines
A PDF is also an SVG (Scalable vector graphic) and it could possibly still be a display issue unless you have printed it on plain paper already and it prints that way. I haven’t etched a board in...
View ArticleGround Fill with gap lines
Many thanks for your attention, i will print and back to tell you the result. unfortunatly, i don´t have a easy contact company to do the boards…
View ArticleClik here to view.
Ground Fill with gap lines
thiago_cezare: unfortunatly, i don´t have a easy contact company to do the boards… You can use any of those companies. They all make boards for makers not just large corporations. They all accept...
View ArticleSchematic frame missing right side line, Landscape
This is probably a very simple issue. I’m trying to use the schematic frame on an 8.5 x 11 inch sheet, in landscape. (width = 265mm, height=195mm) (when I refer to portrait & landscape, this is...
View Article
