Eagle2Fritzing on Windows
Damn, it does a pretty good job except body lines are white instead of black. It looks like FZ is the problem not the Eagle2FZ.
View ArticleXbee pro + mini usb adapter
Are you saying the female headers are a 2mm pitch instead of the usual 0.100" pitch. You have to use the correct one for PCB view incase it gets plugged into a PCB. As for BB most of the boards are on...
View ArticleClik here to view.
Eagle2Fritzing on Windows
Old_Grey: It looks like FZ is the problem not the Eagle2FZ. If the issue is deeply nested (and pointless) groups, yes I think that is the Fritzing parts exporter. The converted Fritzing schematic svg...
View ArticleClik here to view.
Xbee pro + mini usb adapter
KingDarBoja: So the question right now is: Should I let it as it is to maintain the real aspect of Fritzing parts? In general it is part makers choice. That said, I’ve found when mixing 2mm and .1...
View ArticleEagle2Fritzing on Windows
I don’t know what happened with the SCH - I might not know Eagle well enough - but I remember trying to mod parts and there was pads on pads with connector ids on connector ids, like everything was...
View ArticleClik here to view.
Eagle2Fritzing on Windows
vanepp: There seem to be only two pins where the eagle original has many more that don’t show in the Fritzing version. The code provided by adafruit (Eagle2Fritzing) only requires .brd file to work,...
View ArticleEagle2Fritzing on Windows
All I did was find an IC in the library and place it in SCH. And when I created the PCB it asked if I wanted to use that IC in PCB, and I said yes. Man that Eagle wasn’t intuitive, you make a project...
View Article19885 RGB 8x8 LED Matrix Module
This is beautiful! Thanks! Do you have any favorite charities I can donate to on your behalf?
View ArticleClik here to view.
Part appearing on both Sides of PCB
I edited two parts as shown in the picture. But after editing they appear on both sides of the PCB while I want them on the bottom side. I think the problem is in the SVG file with the copper0 and...
View ArticlePart appearing on both Sides of PCB
You can export just the part by right-clicking it from the bin. Usually copper1 is top layer pads and copper0 is bottom on top mounted parts - it might be reverse for bottom mount -, either way try...
View ArticleLooking for an STM32 Blue Pill Part
I am new to Fritzing and have been using the STM32F103 Blue Pill module for several applications. I would think that others may be using the same. I am looking for the part object to use in Fritzing....
View ArticleLooking for an STM32 Blue Pill Part
A google search for “fritzing part STM32F103 Blue Pill” turns up...
View Article19885 RGB 8x8 LED Matrix Module
I didn’t do all that much, the bulk of the work was in the part I cloned from by someone else from this repro on github (this one is 64mm by 64mm rather than 48*48):...
View Article12V Lead Battery
I apologize for the late response. My Fritzing emails keep ending up in spam (have to fix that). I ended up just putting a 9V and specifying that it should be 12. For my purposes that should work just...
View ArticleXbee pro + mini usb adapter
Yeah, noticed that Fritzing align the parts based on the 2.54 mm (0.1 in) connectors instead of the little ones, no matter how much I tried moving it on Inkscape or changing the grid size on Fritzing....
View ArticleClik here to view.
Xbee pro + mini usb adapter
KingDarBoja: Yeah, noticed that Fritzing align the parts based on the 2.54 mm (0.1 in) connectors instead of the little ones, no matter how much I tried moving it on Inkscape or changing the grid size...
View ArticleMake or find component for ardupilot (quadcopter)
Make or find esc component for ardupilot mega. Сan be done without unnecessary details: + and-for power, + and-to connect the motor,+, -, s to control the element I can’t do it because I work with...
View ArticleMake or find component for ardupilot (quadcopter)
You have several options: us a mystery part or a generic 6 pin IC to get the apparent 6 connections you need (I’m assuming you only want breadboard to show the module interconnection not pcb) of...
View ArticleClik here to view.
Xbee pro + mini usb adapter
vanepp: Actually for me none of them are on the grid , I haven’t found a way to make it fit to the grid even moving the .1 connectors in Inkscape by what I think should be a correct offset to put them...
View Article