4N25 Optocoupler created
Hi, thank you for your instructions. I’ve also improved my part and uploaded it to repository mentioned above if someone follows by the link. I hope the part is ok now. Kindly regards
View ArticleBME / BMP 280 sensor
Hi, thank you for your instructions. Yes, I’ve obviously missed somethings when creating this part since it is not my routine yet. I’ve also improved my part and uploaded it to repository mentioned...
View ArticleClik here to view.
BME / BMP 280 sensor
If these are your first parts you are doing very well. Part creation is a complex process and takes a while to learn, in addition it is poorly documented meaning asking here for help is pretty much...
View ArticleThe Pressure Stat in Washing Machine
Very low frequency. Let me think about it and get back to you!
View ArticleThe Pressure Stat in Washing Machine
Since this sensor is already digital, I would stay in the digital domain as it is likely to be a lot easier than anything analog. Basically you need to count the milliseconds between pulses which most...
View ArticleThe Pressure Stat in Washing Machine
I agree with Peter. Using the signal to gate a counter is very easy to do, then processing that digital result from there. You could do it with an Arduino. If you really wanted an analog output (which...
View ArticleThe Pressure Stat in Washing Machine
First of all, thanks for your attention Guys. Yes, I also think staying in digital domain. I let you know when I started to do that. Thanks&Regards
View ArticleThe Pressure Stat in Washing Machine
Depending on what you are trying to do, even a micro may be over kill. I’m thinking this is meant to be portable and possibly battery powered for a service person to use in the field and thus a go/no...
View ArticleDoit esp32 devkit v1
I want to share a part: It is a DOIT ESP32 DEVKIT V1 with 30 pins. The pins are (obvious) in two rows and the distance between the two rows is 1100 mil. The pads are oblong/rectangular - so it is able...
View ArticleDoit esp32 devkit v1
This appears to have a number of problems. As you noted breadboard isn’t complete (although the graphic part is very good so it would be worth it to correct it so the part works correctly for others)....
View ArticleUpgrade of Library
Had not run Fritzing for quite some while. It offered to upgrade my library, which I let it do. I now get the following errors on startup Unable to find the following 2 parts: ‘IchigoJamT’ at...
View ArticleUpgrade of Library
You might try a part database rebuild Part->Regenerate parts database and see if that fixes it. I may get adventurous and clone the latest repo (updates on Windows7 at least are currently broken)...
View ArticleUpgrade of Library
Hi I tried Part -> Regenerate Parts Library but it failed with a message " Failed to open Temporary File" I am on a Mac with Fritzing 0.9.3. I also did a check for updates and got an error message...
View ArticleUpgrade of Library
Two things to try , you may want to keep a copy of the user directories which on a Mac are in /Users/username/Documents/Fritzing/parts and ~/.config/Fritzing then reinstall Fritzing which will replace...
View ArticleDoit esp32 devkit v1
Peter, thank you for crosschecking and your feedback. You are absolutely right - it’s not 1100 mil. I messed it up: “11 pins width” are not more than 1000 mil. Any inaccuracy resulting in 997,9 in the...
View ArticleClik here to view.
Doit esp32 devkit v1
noiasca: You are absolutely right - it’s not 1100 mil. I messed it up: “11 pins width” are not more than 1000 mil. Ah, so the spacing should actually be 1 inch rather than 1.1? noiasca: However the...
View ArticleClik here to view.
Doit esp32 devkit v1
noiasca: P.S.: is there any up to date “Tutorial” / Guideline / Style-guide how to design parts? I just see a lot of “hints” in the forum but no actual description. Fritzing PART CREATION Video...
View ArticleClik here to view.
Doit esp32 devkit v1
yes the part is just 1 inch only. sorry, I only find that one internal bus in pcb and schematic view, where do you see two of them? fritzing.png1331x535 81.2 KB
View ArticleClik here to view.
Doit esp32 devkit v1
noiasca: sorry, I only find that one internal bus in pcb and schematic view, where do you see two of them? in the fzp file for the part (which defines the buses) there is a second bus but with non...
View Article