Cannot use integration of arduino ide
Thanks Peter for your information. I am nearly sure this can be fixed within one or to additions to fritzing code line where the command line is build… I would participate and add my help - but I...
View ArticleCannot use integration of arduino ide
My “old problem”: first digging the web and then question… I git the github “fritzing.app”. At my first try I installed fritzing on my “Siduction” system (based on Debian experimental) and surprise,...
View ArticleClik here to view.
Cannot use integration of arduino ide
I’m surprised it works at all! My understanding from a couple of years ago, is that it was waiting for the Arduino IDE to support the command line interface. Perhaps the code was in Fritzing, and just...
View ArticleClik here to view.
Please don't link the download button to Paypal
Thanks a lot Peter for your clarifications. Indeed, the rate of donations vs. downloads was low, about 0.1% . Some money is made with PCBs, but only if people order them at our partner AISLER. It is...
View ArticlePlease don't link the download button to Paypal
One very strong argument for this going forward will be if the rate of donations picks up (which is what I hope will happen!) Only time will tell with that. edit: A late thought: perhaps point out...
View ArticleTraduzione in Italiano
I have made this translation a pull request, scheduled for 0.9.5: https://github.com/fritzing/fritzing-app/pull/3565
View ArticleCannot use integration of arduino ide
I can confirm that the issue was not related to Fritzing but to Arch Linux. For those who run into same problems: give user access rights to the interface: sudo gpasswd -a uucp set working java as...
View ArticleCannot use integration of arduino ide
Thanks for the update! I’ll have to see about trying this on Windows to see if I have been giving out bad advise about it not working. I guess maybe the commands for the Arduino IDE may have been...
View ArticleClik here to view.
Changing colors of part leads in Schematic View
In this picture, for example, I have several resistors. I am using blue wire on the one side and want the connections of the actual resistor to be blue, instead of green. This is the same with other...
View ArticleChanging colors of part leads in Schematic View
You can’t. The connectors (the part that goes red/green) are part of the part, and Fritzing automatically sets them red if not connected or green if connected. Peter
View ArticleClik here to view.
Cannot use integration of arduino ide
I think you swap “documented” and “implemented” …and I see it same way. All is working completely. You can edit the code in the “code tab” and compile/upload without leaving Fritzing. Yesterda all...
View ArticleFont error in parts editor when reading schematic svg which is edited with...
@historic_bruno You are using opening and closing single quotes here. Was this some forum UI replacement, or do you really have a file like that?
View ArticleFont error in parts editor when reading schematic svg which is edited with...
While I’m not the OP, I’ve seen this construct (this was likely converted via the check parts script to remove the styles, note the double quotes on the Droid Sans which was likely added by lxml...
View ArticleClik here to view.
Cannot use integration of arduino ide
I’m learning more and more , I had always understood that this function would only load the code, that you had to start the Arduino IDE to change code, when it sounds like the integration is complete....
View ArticleCannot use integration of arduino ide
I must learn, too. Actually I am contributing to embedded systems projects, php and Arduino (ESP32). But I see Fritzing in education purposes - which is a high priority aim in my life. So I will start...
View ArticleInstallation into a Raspbian Raspberry PI 3 B+
hi guys Im new to all of this, and I’m working on an experiment with a Raspberry Pi. Our intent was to build the components and wiring on fritzing, and then put the code into it as well, and then...
View ArticleCan Raspberry Pi be simulated on Fritzing?
Hi guys I’m new to all of this, and I’m working on an experiment with a Raspberry Pi. Our intent is to build the components and wiring on fritzing (or another virtual test platform), and then put the...
View ArticleFritzing claims parts loaded to bins already but parts can't be found
I am using Fritzing on a Mac and I imported over some Adafruit parts. I go and find parts and I can’t find the wanted parts. I probably forgot to save the parts but Fritzing won’t let me reimport the...
View ArticleClik here to view.
Changing colors of part leads in Schematic View
The colors for the connectors can be set globally. So, if you want to replace red/green with red/blue for better color distinction, you can do this under edit->preferences. image.png530x554 44.3 KB...
View ArticleClik here to view.
Can Raspberry Pi be simulated on Fritzing?
hiranga: Our intent is to build the components and wiring on fritzing (or another virtual test platform), and then put the code into it as well, and then simulate whether a) we’ve wired things...
View Article
