IC Component CReation
Peter I did check the footprint and it is an exact against the actual chip. However, I started to create a new pcb layout with the chip. and it seems to work ok until I ran the DRC (Design Rule Check)...
View ArticleClik here to view.
IC Component CReation
You need to set the grid size down to be able to position the traces far enough apart to pass drc. I’m using 0.01in (down from the default .1in) here and drc passes. You can also relax the default drc...
View ArticleClik here to view.
Part update pcb view mess, possible corruption in sketch
vanepp: I seemed to be having trouble getting both sides to sync at once (one side or the other would but not both) indicating an alignment problem. I think the pin rows of the original part were not...
View ArticleClik here to view.
Part update pcb view mess, possible corruption in sketch
While I like my theory that all was well better, that does seem to be blown. I agee the thing to do now is find the minimal set of wires that cause the problem so that ubiquitous person someone can...
View ArticleClik here to view.
I need a power supply
Hi there, I need this power supply pins for pcb. Screenshot_2020-02-12-15-46-55-745_com.opera.mini.native885×849 140 KB The pin diagram is here power supply819×460 17.6 KB Please can anyone give this?...
View ArticleClik here to view.
Using property names in part creation
KjellM: The referenceFile attribute seems only to be used by the parts editor. I read it as “as long as the part does not have its own svg, use that of the referenceFile”. I don’t think we need to...
View ArticleLooking for a usb Mini B connector non smd
Hi there, sorry to bother you with this simple issue, , but I am unable to find a normal 5Pin USB Mini B connector for non SMD. Just like this one here:...
View ArticleClik here to view.
I need a power supply
There is a generic one here: AC to 3.3V 700mA Power Supply Part? As it happens I have a bunch of these in various voltages, currents and shapes. Thus a generic part that isn’t any of them. If you need...
View ArticleUsing property names in part creation
I wonder if this is intended to allow reuse of svgs already in core parts (although I don’t necessarily see how?) One thing on my list of enhancements is a way to specify in the layers section an svg...
View ArticleLooking for a usb Mini B connector non smd
This should do what you want. Since I don’t have one, and thus did this from the data sheet you should print out the footprint at 1:1 scale and check both the pin positioning, hole sizes and the pin...
View ArticleLooking for a usb Mini B connector non smd
Thank you very much! I will give it a shot. It will take some days to report back, if everything worked out. Don’t worry about the slots, I drill all my holen in 0.8 on my cnc and then widen the...
View ArticleSparkfun XBee Explorer Regulated WRL-11373
Sparkfun XBee Explorer Regulated WRL-11373. The old version is in the Fritzing library. The long side pins have relocated inward on the current version. When I asked about it on their forum they said...
View ArticleI need a power supply
This should do the job, as always verify the pcb footprint before ordering boards: generic-ac-power-supply-2.fzpz (5.1 KB) Peter
View ArticleSparkfun XBee Explorer Regulated WRL-11373
By “in the library” they likely meant the Sparkfun Fritzing repository on github, not core parts. That is not loaded in to Fritzing by default, you need to fetch it from github and load it (or just...
View ArticleNeed help with finding a library for a barcode scanner
Hello! I am new to this forum, I have recently started using Fritzing 0.8.7b but I’m unable to find the library for a barcode scanner (NTEUMM) for a smart lock project that I’m currently working on,...
View ArticleNeed help with finding a library for a barcode scanner
First off 0.8.7b is quite an old version of Fritzing, 0.9.4 is the current release and you would probably get better support if you upgraded to it. That said, are you looking for a Fritzing part for a...
View ArticleClik here to view.
Searching for 3.5mm 4pin Jack YD-PJ-3566
I’m new to fritzing and play a bit around… Now I need help… I search for the part file of a 3.5mm jack. This Model: HTB115qOaZrrK1Rjy1zeq6xalFXaE888×392 48.4 KB Regards
View ArticlePart update pcb view mess, possible corruption in sketch
Bringing references over here for a work around. work around discover reimplementation and testing The apparent cause of the bogus breadboard wires and disconnected pcb traces is a slight mismatch in...
View ArticleUnable to install Fritzing in Win 10 64bit HP PC
Hi, just now installed the windows version code of Fritzing and tried to install it. Its is not beginning installation and no error is also reported. I had made the payment through PayPal after which...
View Article
