2N3055 or TO-204AA (TO-3)
I am missing part 2N3055. It is quite general power transistor, but I can't find it anywhere. Casing is TO-204AA (TO-3). Any help where I could obtain this or is it in fritzing libraries already?
View ArticleClik here to view.
Clik here to view.
Perfboard Layout
I'm attempting to create a PCB which will have 20 LED's and for the time being, will be powered by a 9V battery until I can get a little further into the project. It is started on a perfboard and have...
View ArticlePerfboard Layout
Looks like it should work. The LEDs have a polarity so you need to get that the correct direction as if one or more are the wrong way none of them will light. Raising or lowering the value of the...
View ArticleClik here to view.
Custom shapes for the solder mask blocker
Ok awesome Is there also a feature that allows you to leave solder mask off one entire side of a PCB? My PCB is 228mm x 139mm. Kinda big.
View ArticleClik here to view.
Custom shapes for the solder mask blocker
So you inherited my magical wizardry powers... Try this one, invisibility copper 240mm 150mm, one side. You can use it over the whole board or just part of a board. The invisibility copper also blocks...
View ArticleCustom shapes for the solder mask blocker
Very nice, thank you <3 So I tried out both and the smaller circles you sent before block the mask perfectly on both sides when I use a gerber viewer. But the 240mm x 150mm blocker doesn't show...
View ArticleCustom shapes for the solder mask blocker
That is interesting... The right side of the blocker need to be touching the board. When I tested it out, I covered up left half of the PCB, assuming it would work if you covered up all of the board...
View ArticleCustom shapes for the solder mask blocker
Yep, it does exactly the same thing with a real copper pad... So it is a Fritzing thing...
View ArticleCustom shapes for the solder mask blocker
That's so weird I was just wondering about trying just that. Will let you know if it works!
View ArticleCustom shapes for the solder mask blocker
Even when I rotated the copper pad on the right side 180 deg. it didn't work... The right side of the blocker/copper has to be touching the board... weird!
View ArticleCustom shapes for the solder mask blocker
It's a go! Have and a excellent day and thank you for making these files!
View ArticleLinux fails on fatal IO error 2
Actually, I solved it by opening it in rollApp. Thanks a LOT for effort guyz. @smilliken @landracer @vanepp
View ArticleClik here to view.
Need a part creating or finding?
Hi, Can anyone create or find this part for me in fritzing urgently? Many thanks, s-l1600.jpg850x674 60.3 KB
View ArticleNeed a part creating or finding?
Specs: 100% Brand new and high qualityQuantity : 1pcSize: 21mm x 18mm1.8V to 6V Supply VoltageMax I2C Speed: 3.5MhzLow power consumption - 0.5uA at 1HzI2C interfaceVery low noise - up to 0.02hPa...
View ArticleNeed a part creating or finding?
Actually no worries found it at: https://github.com/adafruit/Fritzing-Library/blob/master/parts/Adafruit%20BMP180.fzpz
View Article