How to Make Capacitive Touchpads in Fritzing
Do you want the solder mask over the top of your shape or bare copper? Do you want it connected with a trace on top or via?
View ArticleHow to Make Capacitive Touchpads in Fritzing
I'd like a solder mask over the pads if possible but I also need to be able to connect from both layers. For my first prototype I used the standard rectangular copper pads that come in the fritzing...
View ArticleHow to Make Capacitive Touchpads in Fritzing
If the copper is a connector, you will not have a solder mask on top and not re-sizable. If you place it as a logo (image), a solder make will be placed on top and they can be re-sized. Try this:...
View ArticleHow to change the distance between two strips?
Hi! It is possible to change de distance between the strips in PCM view.In normal mode, it is 2.44mm and i would use a 1.22 mm. If yes, how ? Thanks!
View ArticleTwitter Saurus aus dem Creator Kit
Hallo,Beim Processing Code zum Twittter Saurus erhalte ich folgende Fehlermeldung: The Class "Twitter" does not exist Muss ich noch eine weitere Bibliothek einfügen als die hier unten stehenden? >...
View ArticleHow to connect hole with copper ring with other connector?
I use them enough that I created a part ready made to use.I have attached it for you .PcbWireHole.fzpz (4.0 KB)
View ArticleRemove old ref in .fzp file
<?xml version='1.0' encoding='UTF-8'?> <module referenceFile="sparkfun-connectors-50-pin-centronics-m-male.fzp"...
View ArticleRemove old ref in .fzp file
Is the "referenceFile=" the "part.174917_DENSO-ECU-socket_48pin.fzp" with the "part." removed.And the "moduleId=" the .fzpz file with the .fzpz removed?
View ArticleRemove old ref in .fzp file
Yes. In my experience it doesn't care about the referenceFile, only the moduleId but the referenceFile should be the fpz name and I think the moduleId must be the fpz filename without the fpz.
View ArticleRemove old ref in .fzp file
I'm going by Steel's last part, as I assume he's up with it. PADI-IoT-Stamp.fzpzpart.PADI-IoT-Stamp.fzp > <?xml version="1.0" encoding="UTF-8"?> > <module fritzingVersion="0.9.3b"...
View ArticleRemove old ref in .fzp file
I believe 0 0 is left top (that's where it is in Inkscape and I think Fritz is the same). I've never had any luck getting parts with pins on non .1 centers to align correctly though.
View ArticleRemove old ref in .fzp file
The old part did, but not this new one. In the old part the 0 stroke ConnecterTerminals were all inline, ie not staggered, and I assigned the contacts to the actual ConnectorPin node in FZ Editor - it...
View ArticleOptocoupler SMD parts (and changing existing parts)
Hi,I'm trying to add the PC817 as SMD variant. I have succesfully created the SMD alternative and Fritzing recognizes it partially (it won't give overlapping errors for the holes). However the holes...
View ArticleClik here to view.
New parts editor not available
I cannot start new parts editor:I downloaded latest version 64bit for windows 0.9.3. Pasted image880x436 14.9 KB I am trying to create new part.
View ArticleHow to Make Capacitive Touchpads in Fritzing
Thanks. Does this apply to vias as well? Can I just put a via onto a silkscreen image that's in the copper layer and expect this to turn out like a pad with via in production? You say 'what ever...
View ArticleHow to Make Capacitive Touchpads in Fritzing
Yes, you don't need to run the trace to the image... you can place a via through the image and connect to the bottom side of the via. But, a via is a connector and around that via there will be no...
View ArticleNew parts editor not available
OK I found out I need to right click on part and then "Save as new part". Then part editor opens and I edit part.However I created SVG with imported image, and then I find out at some point my image...
View ArticleClik here to view.
New parts editor not available
While I've not done it, bitmaps (for breadboard view anyway) can be imported. If it is being truncated I'd probably check that it is contained within your viewbox in Inkscape as I believe things...
View ArticleClik here to view.
Optocoupler SMD parts (and changing existing parts)
If you post your modified part here someone will likely be able to point out your error. You may also find help in one of these: A new part creation HowTo (long! So long it is in 2 posts) beginners...
View Article