Quantcast
Channel: fritzing forum - Latest posts
Viewing all 32393 articles
Browse latest View live

Compression spring contacts

$
0
0

Name of the part
Compression spring contacts

Previous work, similar parts
None

Top view
I can post only one media as a first time user, but the datasheet is quite telling, see below

Datasheet

Type
Breakout board, sub assembly, plug in module (A)
Antenna (AE)
Battery (BT)
Capacitor (C)
Diode (D)
Display (DS)
Fuse (F)
Hardware , mounting screws, etc. (H)
Jack, fixed part of a connector pair, header (J)
Relay (K)
Inductor, Coil, Ferrite bead (L)
Loudspeaker, Buzzer (LS)
Motor (M)
Microphone (MK)
Plug, moveable part of a connector pair (P)
Transistor (Q)
Resistor (R)
Thermistor (RT)
Varistor (RV)
Switch (S)
Transformer (T)
Integrated Circuit (IC)
Crystal, Oscillator (Y)
Zender diode (Z)
Other (please specifiy)

Footprint
No clue, sorry!


Compression spring contacts

$
0
0

footprint refers to the pcb footprint which is included in the datasheet. Missing is a website where these are available such as this one (found via a google search for “Compression spring contacts bc12-np”)

https://www.aliexpress.us/item/2255800096057700.html?src=google&aff_fcid=118fefeeadbc40ca9599255790d2434e-1712252581964-07715-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=118fefeeadbc40ca9599255790d2434e-1712252581964-07715-UneMJZVf&terminal_id=255797a9e6a14b75b97c2e762b38987d&afSmartRedirect=y&gatewayAdapt=glo2usa4itemAdapt

for images of what the part looks like and how many pins you want as it comes in anywhere from 2 to 8 positions.

Peter

Smat robot car v4.0 with camera

$
0
0

A google search of the form “Smart car 4.0 with camera” turns up a number of hits.

Peter

Smat robot car v4.0 with camera

$
0
0

I want to build the car, but I need different components, like Arduino UNO R3, esp32 camera module, servo motor sg90, motors, ultrasonic sensor, HC-06, BME280, Battery. But I don’t know where to get them.

Compression spring contacts

$
0
0

Thank you very much Peter! I am looking to use the 2 pins version.

Smat robot car v4.0 with camera

$
0
0

Many are in core parts and the search bar will find them.

for ones that aren’t in core parts a google search of the form “frtizing part esp32 camera module” will find available parts.

Peter

Looking for a HY-SRF05 Ultrasonic Range Finder

$
0
0

Name of the part
HY-SRF05 Ultrasonic Range Finder

Previous work, similar parts
Very similar to the HC-SR04

Top view

image

image

Foto or vector graphic, no links here please.

Datasheet
(https://datasheetspdf.com/pdf-down/H/Y/-/HY-SRF05-ETC.pdf)

Type
I did not read this
[ x] Breakout board, sub assembly, plug in module (A)
Antenna (AE)
Battery (BT)
Capacitor (C)
Diode (D)
Display (DS)
Fuse (F)
Hardware , mounting screws, etc. (H)
Jack, fixed part of a connector pair, header (J)
Relay (K)
Inductor, Coil, Ferrite bead (L)
Loudspeaker, Buzzer (LS)
Motor (M)
Microphone (MK)
Plug, moveable part of a connector pair (P)
Transistor (Q)
Resistor (R)
Thermistor (RT)
Varistor (RV)
Switch (S)
Transformer (T)
Integrated Circuit (IC)
Crystal, Oscillator (Y)
Zender diode (Z)
Other (please specifiy)

Footprint
E.g. SOT23-5 , TO-220.
This usually does not apply to breakout boards.

Compression spring contacts


Looking for a HY-SRF05 Ultrasonic Range Finder

Compression spring contacts

$
0
0

Thank you so much Peter! I really appreciate your help!

Part Request: ESP32-S3 SuperMini

$
0
0

Hello,
I’m working on a robot project and i’ll use this board for my project.
so i have to use the SMD GPIO pins also as the other pins are not enough for my project.
I’ve made a PCB design to transfer the SMD GPIO pins into easy accessible pin headers
here is my PCB :


esp32-s3-super-mini-shield.fzz (50.4 KB)

but the problem is : i don’t know how to connect the SMD pins to the PCB.
i tried searching for Pogo pins but i didn’t find any suitable size as the pads are too close to each other.

if you have any idea of how can i achieve the connection of the SMD pads to the PCB (preferably without soldering the board to pcb ) please let me know.
Thanks :slight_smile:

Part Request: ESP32-S3 SuperMini

$
0
0

A google search for pogo pins turns up a 1mm pogo pin (501-1827-ND) at digikey ($6 ea though) that should do as the pitch on the smd pads is about 1.8mm. There may be other cheaper ones available if you search.

edit:

amazon has .68mm diameter pogo pins at $11/100 which should do.

https://www.amazon.ca/s?k=pogo+pins&hvadid=208323604076&hvdev=c&hvlocphy=9001528&hvnetw=g&hvqmt=e&hvrand=12602758527412695772&hvtargid=kwd-298504035275&hydadcr=11031_9613605&tag=googcana-20&ref=pd_sl_8bpu3yydtw_e

Peter

Looking for a HY-SRF05 Ultrasonic Range Finder

$
0
0

Thanks. I guess I didn’t cast my net wide enough :smiley:

Part Request: SparkFun XM125

Looking for a HY-SRF05 Ultrasonic Range Finder

$
0
0

The HC-SR04 part has a second image that is a top view. I thought I might be able to use the parts editor to modify it to add a fifth pin and change the layout slightly to accommodate it. I did a search for a tutorial on how I might do this but I am completely baffled. So far, what I have found is that the tutorials haven’t been updated for the latest release of the editor so I’m at a loss how to do what I want. Can you give me any guidance? If there are any current tutorials that you can point me to, I’d like to try to learn how to do this myself.


Looking for a HY-SRF05 Ultrasonic Range Finder

$
0
0

These two tutorials apply to the current Fritzing versions (although successful part creation is not easy.)

I lately learned there aren’t links to the videos in Old_Grey’s tutorial so you need to do a google search for the title and then they come up on YouTube.

Is there something wrong with the HY-SRF05 part listed above?

Peter

Looking for a HY-SRF05 Ultrasonic Range Finder

$
0
0

There isn’t anything wrong with the part you found (thank you again) but I’m teaching an introduction to electronics class for some 12-14 year old students and they have problems with abstractions. I’m making a Fritzing document with the details on how to connect the part to an Arduino to put in a PowerPoint presentation for them so they can see the connections visually. They will be plugging the sensor into a breadboard and so I need an accurate top view of the part to show the proper connections.

I was trying to modify the existing HC-SR04 Variant 2 but I’m finding the process difficult. I found a Sparkfun tutorial at Make Your Own Fritzing Parts - SparkFun Learn but I’m still confused.

Looking for a HY-SRF05 Ultrasonic Range Finder

$
0
0

Yes (or another svg editor, but Inkscape has the most control of any I know.) I’d advise using FrtizingCheckPart.py (pointer in my tutorial) as all the svg editors do things that Fritzing doesn’t like (such as add px to the font size for CSS compatibility) which tends to cause problems by changing the font size to too large or too small. As far as I can see the main difference between the two is the right angle connectors on the SR04 part (and the extra connector which means you need to modify all three views to add the extra pin!) It is easy enough for me to add them to the SR05 part if you like.

I don’t have any objection to you learning to make parts, but as noted it is complex and takes a long time to learn (especially if you aren’t familiar with an svg editor) and tends to bite without warning (usually by the new part malfunctioning.) although FritzingCheckPart.py tends to sort of help there (you need to be able to read the xml to figure out what it is telling you though!) I tend to fix and make parts for folks for that reason.

Peter

Looking for a HY-SRF05 Ultrasonic Range Finder

$
0
0

image
This is what I’m trying to achieve, although with 5 pins instead of 4. The wires will plug into the breadboard behind the sensor so showing the front view would be wrong because the wiring would be backwards. The experiment involves coding an Arduino to read distance and the breadboard will hold the sensor steady to give better results.

The important thing for my students is to be able to see which wire goes where when hooking things up.

Having reached the age of 72, I’m not sure I have enough years left to devote to learning Fritzing part creation. As long as you are willing to help, I’ll be happy to accept.

Looking for a HY-SRF05 Ultrasonic Range Finder

$
0
0

image
This is the part I was hoping to modify.

Viewing all 32393 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>