I’ve seen this part used a few times for tutorials. If anyone needs, I modified the breadboard view for the load sensor’s three pin female header with a closer representation of the part right here:
I do not usually work with Inkscape/Fritzing parts but it seems to be a functional testing it out. Here’s a preview of the part:
Enjoy. =)
Somewhat of good timing…
I needed to take my motor-driver from breadboard to PCB. It’s a simple enough design (very commonly used) and I no longer wanted to dangle them from wires.
I was in the middle of doing it when I saw this post - specifically regarding Copper Ground plane.
The Fritzing gnd plane is cumbersome so, when needed, I use the “Copper Image” part and load my SVG.
Works well for my projects so, I thought I post response…
I just started this and it’s only roughly designed but it’s enough to convey the concept. (will finish it soon).
Image tells it all…
The SVG of the gnd-plane
The gnd plane lays under the 4-gnd pins (will extend to second H-bridge chip)
The two traces will not be needed as the plane will be in contact with each chips 4 gnd pins. The plane is intended to help dissipate heat.
Not bad, but it has a few issues:
Breadboard,
the pins (especially the white one) aren’t on .1in boundaries.
schematic
only the connector0terminal termianlId is labeled correctly causing the connection to the middle of the pin instead of the end:
instead of the corrected:
An improved replacement of your part:
10245_load_sensor_strain_gauge_top_view-improved.fzpz (9.9 KB)
If you are going to do more Fritznig parts (I’m assuming you are with Sparkfun, as this is in their repo), you may want to use the part check script. It checks for these types of errors and corrects some of Inkscapes incompatibilities with Fritzing:
Peter
#stvz thankyou sir. it works
Samsung is an incredible product. However, there is one thing in my mind, therefore, I want to share issues related to Samsung printer. Sometimes the issue may occur while printing an important document. Recover the issue with just one click, follow this quick fix guide samsung printer error code u1-2320 and error easily. I had personally checked and had applied the steps to recover my printer and it is truly incredible.
What’s all these BS posts turning up.
I’m flagging it.
hello peter; I always test this system of connectivity on my arduino card with connectors prepared. It’s not terrible, it takes room in height and it does not fit very well. I think I will solder my wires directly to the red pines and put a heat-shrink sleeve on each pin. I really prefer the nappes and connectiques for computer . I have not ordered the 2 circuit boards yet.
Hi, Its my first time using FRITZING and i can’t find the normal or generic IC’s, for example: SN74LS08,00,86,32… etc, the basic ic, and SN74LS47N, SN74LS83 please halp frens, humm any package, library, file or tuto for download please?
Thanks 
That is certainly the best solution as many failures are from connectors that don’t connect properly especially with vibration and motion (which are present here). The downside is having to unsolder to replace broken connections, but I suspect soldering on all connections will be the most reliable solution.
Peter
As well a google search of the nature “fritzing part 7408” may turn up parts that others have made that you can use. You may need to search for variations (74ls08, 74s08, etc) or for 4000 type cmos parts with the same pin out. They will appear as an .fzpz file which you open in Fritzing. That will put the new part in the mine parts bin and let you use it the same as a core part. There doesn’t seem to have ever been interest in making all the 74 type logic parts as fritzing parts with logic diagrams internal although there are some in the 4000 series in core parts.
Peter
hi there could someone please make me a .fzz file of the RYLR896 by reyax please all the dimensions and such are here: http://reyax.com.cn/wp-content/uploads/2017/09/RYLR896_EN.pdf
need for a university project
My multi parts:
74LS04.fzpz (7.0 KB)
74LS08.fzpz (7.7 KB)
74LS32.fzpz (8.5 KB)
Smash that love button and Enjoy!
This site can’t be reached The webpage at http://reyax.com.cn/wp-content/uploads/2017/09/RYLR896_EN.pdf might be temporarily down or it may have moved permanently to a new web address.
ERR_NAME_RESOLUTION_FAILED
Try another link maybe
Not bad, and a welcome addition to the parts stable. That said, a couple of minor issues.:
All three need breadboard svg copied to icon to make the icon 14 dip instead of the current 8 dip.
74ls04
schematic
layerid is incorrect, should be schematic not schematic_1_
pcb (and on the 74ls32)
group silkscreen wants to move above copper1/copper0 to make selection easier. With them this way Fritzing will select the silkscreen instead of copper as desired.
74ls08
fzp file the bus def should be below the subparts end i.e line 301 should be below 302. This doesn’t appear to be bothering Fritzing, but the part check script objects.
Peter
try this
HI, i want to looking for E3F-DS30C4 Omron sensor, but the library my fritzing dont have e3f ds30c34 , please help me.
please send to me link the download part of E3F-DS30C4 Omron sensor, thank all member in forum
