Hi
I was developing a custom part for our prototyping board evive [http://evive.cc], but faced some issues of not linking some vector shapes to corresponding connectors.
I started with Arduino MEGA 2560 (rev3) in part editor and all the connectors were showing TICK mark and in BREADBOARD view, I can see corresponding crossmarks. I saved this vector image and took this as reference and build my own SVG for my board (evive). [Fig1]
Now, I did LOAD IMAGE FOR VIEW to load my SVG design. And all the CONNECTORS of ArduinoMEGA were marked correctly on my newly loaded image. [Fig2] (I am using SVG Tiny 1.2 version)
Now, I added more CONNECTORS from connectors tab [Fig3] and selected the vector shape in SVG [Fig4] then modified the TITLE in METADATA and saved it as new part (some prefix prefix000_evive_1000)
But, now I had to edit the SVG image of my design, so now I again done LOAD IMAGE FOR VIEW. But it was surprising that still the Arduino CONNECTORS are marked as earlier, but the 2 CONNECTORS which I had added were not there. [Fig5]
Then, I added the vector shapes again to corresponding CONNECTORS. But in SVG image, I named the vector shape as the connector ID (like connector380) in Fritzing and then again tried LOAD IMAGE FOR VIEW, but only the Arduino connectors were shown.
Check high resolution snapshots here: https://www.dropbox.com/sh/28r4tnxrube1dli/AAABWwt1gam6EX-lmrN8GSbra?dl=0
I cannot understand why Arduino Pins are still loading, but the connectors added by me are not shown on doing LOAD IMAGE FOR VIEW.
Please help me out.