Fritzing can't do slots, at least it doesn't show in the Gerber drill.txt file, so the pin holes are 2-off x 1mm holes with a 0.1mm spacer to prevent drill breakages when put into production.
If put into production the bridge section will have to be manually cut out.
Datasheets
http://www.qingpu-electronics.com/en/products/WQP-PJ324M-132.html
3.5mm Stereo Jack PJ-324M - PCB mount - 5 pin
v1.0 - 3.5mm stereo jack.fzpz (9.7 KB)