What do folks use to get an appropriate 2mm header pcb footprint? I I used the one generated by setting a standard header to 2mm pitch with inspector, but when I looked at the gerber the pads are way too large (almost no clearance between them). I found 2mm headers in the grove parts in core, but they use a path as the pad and that (as expected) doesn't export to the gerber. I'm going to manually adjust the header pads down to the 60 thou used in the grove parts and recalculate the hole size at .035, but is there a better footprint somewhere that I have missed? I can see there are several bug reports needed here 
Peter