If you are home etching put 0.4mm via on every pad so that it centers the drill very accurately, because if you use the std 0.9mm hole the drill can start off-center. Via size is adjustable in the Inspector. I use toner transfer with that Ebay yellow wax paper etch and tin, and thickness of the copper leaves enough of a step that it centers the drill.
You have to edit the svg to remove the extra pads.
In FZ edit go to PCB/File/Show in Folder, and copy the svg somewhere. Then open it with Inkscape and delete the pads with the XML editor - my video shows you how -, save it and load it back. If you have too much trouble we can make it for you.