Not directly in breadboard. Inside Fritzing there are different svg (a graphic format) files for each view. Typically the ones used for breadboard have been made to look like the component tilted at about 45 degrees. As you have found this is inconvenient with strip board. Therefore for the parts I and others have made for top view for strip board we change the svg for breadboard to look more like the silkscreen in pcb view. Unfortunately it isn’t automatic, we need to create a new part then edit the breadboard svg file with an svg editor such as Inkscape to make the change. That is a fairly complex process until you get used to doing it so it is usually easier to get one of us to do it for you (although learning to make parts is a useful skill if you like Fritzing).
Peter