He must have spent 1 hour on FZ, because the guy obviously doesn't know what he is doing. Just because you have experience in one piece of software doesn't mean you can just jump onto another and be an expert.
Of course parts are hard to make, just look at them. These are not simple stick drawing like other programs, it needs a full drawing for BB view, which is a view no one else has.
Of course you drop your Arduino off the side of the board, because that is what you have to do in real life.
You can connect labels to pins
Just right-click on a part and rotate it, big deal.
"No one needs to know how to connect parts" That's the biggest wrong you will ever read.
No one uses auto router, not even Dave from EEVblog who was a high end circuit designer for 30 years, and he always tells you that.
Basically with Fritzing you pay for the prettiness with part creation, but once you know how to do it becomes less of a problem.
If you are a high end user you probably shouldn't be using it, but if it's a hobby the extra time to make something isn't a problem, like this
