ARM Version for Raspi or Pine64
is it possible to compile for ARM processors? If so, how?http://fritzing.org/forum/thread/976/
View ArticleRunning a single-board-computer
SBC with and SOC? Maybe try Odroid by hardkernel. That C2-plus for 40bucks is pretty slick. Stay away from cubietech, that stuff is garbage. Good luck!
View ArticleARM Version for Raspi or Pine64
You'll need to setup a cross compiler, and then compile. I have a few systems around I can help test if you build a usable package. Some cross compiling/setup...
View ArticleRaspberry Pi 7" Touchscreen LCD
Has anyone found or made a part for the Raspberry Pi 7" Touchscreen LCD that I could use in Fritzing? I've had no luck in finding one. Any help is appreciated. Thanks...
View ArticleClik here to view.
LED - Rectangular 5x2x7mm
Hi, even though it "isn't beautiful" as you said, it actually is! Nice work anyway
View ArticleResistor-array?
Try these... see if they work for you... Resistor Array Parts.fz (32.1 KB) EDIT: After you load them all in, you will need to close and reopen FZ for all the properties to synk...
View ArticleLED - Rectangular 5x2x7mm
Looks like there is a bug in the part code that is a remnant of the 5mm LED I modded, because if you accidentally use the Inspector to change colour it turns back to a 5mm round. I'll have to see if I...
View ArticleRemove Inspector link
I modded a 5mm round LED part into a rectangular LED by swapping out some svgs, but if you use the Inspector to change colour it turns back to a 5mm round. Is there a way to cut out that code - I...
View ArticleLED - Rectangular 5x2x7mm
It is in the properties of you .fzp conflicting with other LEDs...
View ArticleLED - Rectangular 5x2x7mm
I'm not good at code so I would have to hack each one until something happens. Any hints would help, thanks. <properties> <property name="family">led</property> <property...
View ArticleLED - Rectangular 5x2x7mm
Every led in FZ is in the "led" family... so every led with the same property name, like color, the value will be displayed. If you still want to keep it under the led family so you can select other...
View ArticleClik here to view.
Creating parts with movable schematic elements
Here's a TL072 that I got to work with movable parts! TL072.fzpz (13.3 KB)
View ArticleClik here to view.
Clik here to view.
Creating parts with movable schematic elements
Here's what I've been using as a schematic in my dual OTA OTA _sch.png2730x248 9.15 KB As you can see, pin 11 (V++) appears twice (as intended) but my problem is that I'd need both of these to act as...
View ArticleClik here to view.
Creating parts with movable schematic elements
Tips on making parts.I kept finding 'connector0terminal' in the svg with nothing on the layer... what a noodle baker! I found a thread by Steelgoose on here about making those terminals into any kind...
View ArticleHackaday Fritzing Beat Down
If you haven't read this yet it is pretty brutal for Fritzing. http://hackaday.com/2016/10/11/creating-a-pcb-in-everything-friends-dont-let-friends-use-fritzing/
View ArticleClik here to view.
Hackaday Fritzing Beat Down
He must have spent 1 hour on FZ, because the guy obviously doesn't know what he is doing. Just because you have experience in one piece of software doesn't mean you can just jump onto another and be...
View ArticleHackaday Fritzing Beat Down
The author (Brian Benchoff) left this comment below the article: Reward: $100 to the first person to make and document a DIP ‘tiny85 part from scratch in the current version of fritzing, as complete...
View ArticleRunning a single-board-computer
Hai,I am an embedded developer mainly worked on non OS programming.Now I need to develop a project where I have to aquire data from differnet chanels and show the as bar graph and all. No high speed...
View Article