Resistors and other parts have numbered pins. Hover over the pins and you will see pin 0 and the opposite is pin 1. What you are probably doing is connecting to pin1 in one view and forcing that connection to pin0 in another.
Go to BB and PCB and select all traces, and then delete. Go to SCH and delete all wrong rats and finish SCH. Now go to BB and trust the rats and start connecting. The trick with reconnecting parts is you click on the part pin and everything that will be connected to it will turn yellow, and that gives you the guide where to run the trace.
Linked views is brilliant, you just have to know the tricks. If you like you can try another EDA, because they don’t link views so you can’t make that mistake, it’s just you have to do everything twice.
If you can’t work it out post the ,fzz with the 7th button and I’ll look at it.