Clik here to view.
Schematic to breadboard layout
Yes there is an error in schematic, probably caused by moving wires around which can cause (as it appears to have in this case) unwanted connections. The initial state of the sketch is BB has 2...
View ArticleTrack / Trace Width
I see some people say they can set track/trace width as high as 128mil 48mil is the widest available in my drop down. what am I missing? Do I just need to upgrade the version? I’m using 0.9.3 Thanks
View ArticleDetachable views
I’d love to be able to pull a view out of the main window, to be able to work with the PCB view on one monitor while still being able to view the Schematic on another.
View ArticleAdafruit Permaproto causes lag
I noticed the same thing today on Ubuntu. It wasn’t a problem when I tried them 1-2 year ago. As soon as I started trying to place any parts on the board, each hole would flicker blue really fast as...
View ArticleDoes an Arduino Uno Mega Shield SD Card ICSP SPI Exists Already?
hello, here to share: I power my arduino nano directly with 5V or lithium battery power, as well as the SD card. most they works fine, sometimes (<2%) the card went hot and needs restart. if you...
View ArticleClik here to view.
Parts on perfboard move, creating new connections
As I get towards the end of syncing by breadboard and schematic views, so I can move on the PCB, I encounter this problem. There will be a few rats nest connections appearing on the schematic that...
View ArticleUpdate (s) will not download / install
Steps I took that resulted in the problem: Unknown … What I expected should have happened instead: Flawless update … My version of Fritzing and my operating system: Debug Log reads...
View ArticleParts on perfboard move, creating new connections
You are modifying the circuit in one view while there are SOLID connections to that part in another view. Lest hope you haven’t broken the sketch, but select the part you are having trouble with and...
View ArticleAdafruit Permaproto causes lag
Interesting, because I’m not seeing this even with the latest adafruit version on 9.3b and win7 (or I’m using the wrong parts). Check your view->set grid size is set to the default .1 in (finer...
View ArticleClik here to view.
Parts on perfboard move, creating new connections
Old_Grey: You are modifying the circuit in one view while there are SOLID connections to that part in another view. Yes, but doing so seems necessary to keep track of all the parts and placements....
View ArticleClik here to view.
Parts on perfboard move, creating new connections
CJMiller: Even connecting a resistor backwards puts the views out of sync with each other. Resistors and other parts have numbered pins. Hover over the pins and you will see pin 0 and the opposite is...
View ArticleClik here to view.
Parts on perfboard move, creating new connections
It would be most useful for you to upload the entire sketch (the .fzz file) which would let us access the actual sketch and see what the problems are. Single view screen shots are rarely useful....
View ArticleClik here to view.
Parts on perfboard move, creating new connections
vanepp: Normally placement of parts does not change from view to view The is actually a safety built into FZ where if you do something in another view the part will jump off the BB and have solid...
View ArticleClik here to view.
Parts on perfboard move, creating new connections
Old_Grey: There is actually a safety built into FZ where if you do something in another view the part will jump off the BB with solid wires to it, telling you something has changed. Too bad it doesn’t...
View ArticleParts on perfboard move, creating new connections
I think I submitted it as a bug - maybe bendable leg part moving - , but now I think it tells you something changed. I think BB is a solid connection so the part has to move, the only problem is that...
View ArticleParts on perfboard move, creating new connections
I can appreciate that as a novice user, there would be some concerns about my technique. I probably should have stated the problem more succinctly. After all, I posted it under “bugs” rather than...
View ArticleParts on perfboard move, creating new connections
Were just saying that you have use the FZ method or it tangles up the views. Yes in BB - I can’t remember if PCB moves parts -. I think you might also have a problem with connections. If the part pin...
View ArticleClik here to view.
Parts on perfboard move, creating new connections
CJMiller: Regardless of my ability to make the proper connections - are changed connections in one view supposed to physically move those parts in another view? While I would have said no, it appears...
View Article