Parts on perfboard move, creating new connections

Were just saying that you have use the FZ method or it tangles up the views.

1. Yes in BB - I can’t remember if PCB moves parts -. I think you might also have a problem with connections. If the part pin end isn’t green it’s not connected, that doesn’t mean to say it’s not connected to something else somewhere else. Clicking on a pin turns all connected and bendpoints along the way to yellow.
2. Depends if you have a solid connection in another view. This looks like another connection problem, and the thing about connections is they are not connected if touching, you have to purposely make a connection.

Load the .fzz here with the 7th button and we will give you pointers so you can learn.