Clik here to view.
DC Barrel Jack Adapter Male
Do you know of a part that has the code to connect to the BB? I suspect it may be part of the internals of BB in core and thus not generally available (but then I've been wrong before too )?
View ArticleDC Barrel Jack Adapter Male
That suckz. You can save the BB as a new part to get to the code.
View ArticleDC Barrel Jack Adapter Male
I've done that for Brad's board and it isn't all that special (it suppresses terminals is about the only non standard thing visible). The magic takes place as its family as breadboard or perhaps...
View ArticleFritzing custom part for Teensy 3.6
Are the inner pins used in the Teensy, ie should they be in the PCB view. Seams like no one wants to fix this, so I'll have to take a look at it. There is a lot to clean up in the svgs.
View ArticleClik here to view.
DC Barrel Jack Adapter Male
Morning I thought I would provide a picture of the project I'm trying to create the part for. It's a dimmer for a 12v LED strip.12v goes into the BB and powers the UNO and the LED strip. The only...
View ArticleClik here to view.
DC Barrel Jack Adapter Male
Ah, a yet again different use case if you aren't hard wedded to the screw terminals then the power jack in core should do you (search for power jack with the magnifying glass in the parts manager)....
View ArticleFritzing custom part for Teensy 3.6
While this is different than the one Sparkfun sells it seems to match this one: https://www.pjrc.com/store/teensy36.html in which case yes there are connectors missing for all the pads in the middle...
View ArticleClik here to view.
DC Barrel Jack Adapter Male
Hi Vanepp I found the female power jack but I still didn't see a male power jack like I have plugged into the UNO.Thanks for all the help and input anyway.
View ArticleDC Barrel Jack Adapter Male
Is that the version with the pin in the center (as there is one of those in core although on a board rather than as a jack) or the connection from a wall wart which has the hole in the center? There...
View ArticleFritzing custom part for Teensy 3.6
From reading, PJRC are the ones making the series. Seams like all the inner pins are used except the USB header. There probably should be an upside-down version so people can use the square pads, but...
View ArticleClik here to view.
DC Barrel Jack Adapter Male
You are looking for something like this (which at present doesn't do anything except exist )? By the way the coax screw adapter in your picture is available in the adafruit repository (which is...
View ArticleTDA 2003 parts-component
Hello Does someone already design a TDA 2003 parts ? Search for it, and really help me for a new pcb drawing... I'm artist and not really familiar with pcb drawing, i'm basic... thanks for your...
View ArticlePrint Images in PCB
I don't undersand the question exactly. Where did you put the images? Top of bottom slik layer? or copper layer? Do you want the pages in one pdf file? Maybe you can merge them together with a free...
View ArticleClik here to view.
DC Barrel Jack Adapter Male
Morning Vanepp Here is a picture of the exact same product I created using the UNO. The dimmer switch has a female DC barrel jack for the Vin and a male DC barrel jack for Vout. I did get the Adafruit...
View ArticleClik here to view.
DC Barrel Jack Adapter Male
Here is my Fritzing sketch, for now I'm using a screw terminal for the Vout. But another question I have is how do I show the 12v source from the BB to the UNO barrel jack? As the sketch is currently...
View ArticleDC Barrel Jack Adapter Male
The thing about FZ is it's not perfect in BB view, because it's too complicated to make it real world. The plugs in FZ usually have pins on the circuit side but not on the other side, ie the pins of...
View ArticleHow to add MQ135
Hey everyone.I need to add MQ135 to frtizing, since I use it for a school project. I've searched for it, but only an MQ for MQ3, 4, 6 and 7. Thanks a lot
View ArticleClik here to view.
DC Barrel Jack Adapter Male
Sorry, I should have been clearer :-), the adafruit repro only has the barrel to screw terminal part (and then I think perhaps only female). The image I posted was an edited version of the core RCA...
View ArticleDC Barrel Jack Adapter Male
That sounds awesome thanks so much for all your help and advise on this.
View ArticleWrong Camdenboss_CTB0158-2_5_08mm_pitch_90deg_terminals
Camdenboss_CTB0158 connector works fine whenever I use more than 2 terminals.When only 2 terminals are used, the PCB part show two active (red) terminals plus four inactive (yellow) terminals....
View Article