Modem GSM/GPRS Ai A6
As always google is your friend. There is the start (schematic only at the moment) of a Fritzing part here: http://fritzing.org/projects/esp8266-connection-to-a6-gsm-module If you want breadboard you...
View ArticleModem GSM/GPRS Ai A6
Thanks ... I saw it but what I thought was a "full image" for a breadboard.
View ArticleClik here to view.
Modem GSM/GPRS Ai A6
the problem is the "pin spacing": if i use a generic IC object I can set it to 900mil, but is not enough (10 holes).How can I set it to fit as 11 holes of a perfboard? a6 perfboard.JPG942x419 54.5 KB
View ArticleRemove parts pin numbers?
I'm getting complaints from some people about the little (gray circle) pin part numbers. Like on a resistor, one pin is "1" and the other is "2".I have tried to edit them out with no success, can they...
View ArticleRemove parts pin numbers?
In the Schematic View you can hide the pin numbers by clicking on View in the top menu then un-check Text Layer, But that will hide all the text numbers and labels on the drawing...
View ArticleRemove parts pin numbers?
Thanks Steelgoose but that takes out the internal pin numbers on the micro's also. That would really cause problems...
View ArticleClik here to view.
Remove parts pin numbers?
OK... to remove the numbers permanently on the resistor (you can always put them back in); in your Fritzing core folder open the \fritzing.0.9.3b.64.pc\fritzing-parts\svg\core\schematic\resistor.svg...
View ArticleClik here to view.
Modem GSM/GPRS Ai A6
You would need to use an svg editor such as Inkscape to edit a suitable svg (I usually find some existing part with a breadboard that is close and swipe that). Here are pointers to a couple of...
View ArticleRemove parts pin numbers?
I think that at the next restart git will decide the files in core are corrupted and reload them taking the changes out again, so this won't be a permanent solution. Peter
View ArticleRemove parts pin numbers?
Exactly what happened, I though I make a mistake... Tried to change it back to original, would not work.I decided to re-download Fritzing and got caught in the middle of the new changes, took an hour...
View ArticleRemove parts pin numbers?
I don't know what happened... I tried it and it worked perfect... I then changed it back and it worked perfect. Did you just delete the numbers? It won't change the ones that are already dragged out....
View ArticleRemove parts pin numbers?
I may have changed the wrong numbers. I'm using an iMac El Captian 10.11.6Found the Max OS/svg/core/schematic/resistor files but the pin numbers were not where you said they should be. I did fine only...
View ArticleRemove parts pin numbers?
The two lines with numbers would have been the text lines. There are only two text lines in the resistor.svg.
View ArticleRemove parts pin numbers?
Two lines? here's what I have..<?xml version='1.0' encoding='UTF-8' standalone='no'?>21
View ArticleRemove parts pin numbers?
You have to enclose it in the Preformatted Angulars Brackets above. </> Past the code on the page, highlight the code starting from the blank line above the code, then click on the angular...
View ArticleClik here to view.
Remove parts pin numbers?
The magic of extra spaces . The forum reacts to the < as a formatting character but you can often fool it by adding a space after the > like this to get it to print what you want: < text...
View ArticleRemove parts pin numbers?
He has 20 lines of code... he would need to do it to every line. The Preformatted block is the way it should be done and some forums get upset if you don't do it that way. Blynk is always telling...
View ArticleRemove parts pin numbers?
Ah! The trick is that you need to indent the text by 4 spaces before pasting it in. I had tried the preformatted option before but without indenting and it didn't work. Peter
View Article