How to create jumping wire using fritzing tool
Create the straight wire, hover the mouse over the middle of wire, hold down the control key, click/drag the wire to create the curve. Doing this near the end of the wire will adjust the curve at that...
View ArticleClik here to view.
555 IC Will not align with pins in center of Breadboard
Hmm, that should be the same 555 I used in core which seems to be the correct part spacing (some of the user generated parts have either offset from the grid or have incorrect spacing issues but most...
View ArticleNo schematic or pcb rats nest lines for adapter part
Both the plug and jack parts in your example Fritzing sketch have a typo in the connector terminal ids. For the jack, the part fzp file says layer="breadboard" svgId="connector3pin"...
View ArticleNo schematic or pcb rats nest lines for adapter part
Ah, that makes things a bit clearer. Unfortunatly I don't know of a way to make cables (there may be one, that I don't know of though) so you are stuck with creating single wires for the cables....
View ArticleAPA-102-2020 - the ultimate smd addressable led
Well this is sad, someone posted a helpful link on this thread which has now been removed. I guess I know why, it was a link to alibaba supplier page, maybe selling is not allowed here? The only...
View ArticleNo schematic or pcb rats nest lines for adapter part
What I want is a very small breadboard with pins at the edge that will allow it to sit on top of, and connect to, a regular breadboard. If I create the radio module part correctly, no wires will be...
View ArticleClik here to view.
No schematic or pcb rats nest lines for adapter part
microMerlin: Both the plug and jack parts in your example Fritzing sketch have a typo in the connector terminal ids. For the jack, the part fzp file says layer="breadboard" svgId="connector3pin"...
View ArticleAPA-102-2020 - the ultimate smd addressable led
Ok found it - or something like it: https://www.alibaba.com/product-detail/High-Quality-APA102C-RGB-Chipset-APA102_60616739232.html?spm=a2700.7724838.0.0.WGlh9w going to bookmark this page in case the...
View ArticleClik here to view.
APA-102-2020 - the ultimate smd addressable led
Hmm, the pad layout on this one is slightly different than that of the version that adafruit is selling. I suspect that you would need to select your supplier of choice and get their suggested pcb...
View ArticleNo schematic or pcb rats nest lines for adapter part
I have a working version, based on a major cut down from TinyBreadboard. Now to see if I can finish the cleanup without breaking it, and see what the difference ends up from the starting broken...
View ArticleNeed Help : 37 kit sensor parts not found in my fritzing library
i want sensor parts to drawing my 37 project but when i working on fritzing i do not get all these sensor , i wish someone help me and give me all these part to add them in fritzing library thanks...
View ArticleNo schematic or pcb rats nest lines for adapter part
Breadboard has a variety of special features, one of which is it is on the lowest level with everything else above it. I did what started out as a part but ended up being a fzz (due to performance...
View ArticleNeed Help : 37 kit sensor parts not found in my fritzing library
google is your friend. Both adafruit and sparkfun have github repositories of fritzing parts for their products (some, perhaps many? of which aren't in core yet) both of those would be a good place to...
View ArticleNo schematic or pcb rats nest lines for adapter part
I found and read that thread when I was trying to create a part with both a bus and subparts. When I ran into the bug that does not allow both in the same part. I don't really want a breadboard, but...
View ArticleClik here to view.
No schematic or pcb rats nest lines for adapter part
microMerlin: I have not found references to the special features and tags associated with breadboards. As far as I know the source is the only documentation for this (and of course steelgoose who I...
View ArticleNo schematic or pcb rats nest lines for adapter part
This could get into a religious war with others, but here is my opinion. With nearly 40 years doing programming for context. RANT ON For an application / product that has an api (like custom part...
View ArticleClik here to view.
No schematic or pcb rats nest lines for adapter part
All true, but as I understand it (and I'm a late comer, so my experience is limited), Fritzing started out as a funded university research project so there may actually be more documentation than has...
View ArticleUnable to check for and update new parts
Did you actually install the parts and data? cfranklin@cfranklin-Latitude-D630:~$ sudo apt search fritzing[sudo] password for cfranklin: Sorting... DoneFull Text Search... Donefritzing/zesty,now...
View ArticleRaspberry Pi Zero Fritzing Part
I wish I had realised this before sending a design to be made. As a result, I now have 3 useless boards. My own fault for not checking properly.
View Article