2 row header to DIP footprint
I had intended to leave the 3d view as the icon. Is there a reason it should match the bb view? Some parts do, some dont. I thought the icon matched the breadboard view only if the creator did not...
View ArticleDisable Auto Update
Thank vanepp. A teacher is using this as a teaching tool. When the update screen is presented at app start up, some class\ learning time is spent updating the product, where they don't necessarily...
View ArticleClik here to view.
Arduino Pro Mini Disappears From Breadboard View But Stays In Others
I swapped the Mini that was there out for the 3.3V Mini from the search. However, the schematic view doesn't show any connections to the Pro Mini now. I've even tried to replace a few wires with no...
View ArticleArduino Pro Mini Disappears From Breadboard View But Stays In Others
I guess I should add that if I connect the wire directly to the Pro Mini's thru holes the schematic is fine.
View ArticleArduino Pro Mini Disappears From Breadboard View But Stays In Others
It seems that both of the other Pro Mini parts have that problem. If I put in the "Arduino Pro Mini V13" part everything works fine.
View ArticleNo option for the tht capacitor diameter i require
Hi. i am designing a PCB that has a 6x11mm Electrolytic Capacitor capacitor.i can find 100,200 and 300 mil capacitors in Fritzing. how can i adjust the diameter or find other options?
View ArticleClik here to view.
RJ11-6p6c pcb socket
Hi Peter,I could not agree more that there is no consistency in RJ through hole sockets PCB lay-outs. However, the Molex 6P6C Right Angle Through Hole RJ11 Socket would do just fine and can easily be...
View Article555 IC Will not align with pins in center of Breadboard
That sounds like a grid problem again, but I don't know why. A work around may be to set the grid size to .01 and see if that will let you get close enough to 90 degrees to work. Hopefully someone...
View Article2 row header to DIP footprint
I guess there isn't really a reason not to, I usually do it and parts editor actually has a button to copy breadboard to icon but its really up to you. Peter
View ArticleDisable Auto Update
I guess we will have to see if someone more experienced knows of a way to do this then, I don't at this point. Peter
View ArticleArduino Pro Mini Disappears From Breadboard View But Stays In Others
From the picture (with no green dots on the breadboard connections) it looks like the mini hasn't aligned with the breadboard correctly. You could try moving the part with the mouse a bit and see if...
View ArticlePerfboard resizing how to do
may be a stupid newbie question. Don't know how to resize the generic perfboard e.g. change no of rows, no of colums. Inspector shows editable 30 x 20 however changing those values has no effect in...
View ArticleArduino Pro Mini Disappears From Breadboard View But Stays In Others
I an reproduce this on one of the sparkfun pro minis (the 5v one). When dragged to breadboard with grid size set at .1 in doesn't (and won't even if moved) align to the breadboard and connect. A work...
View ArticleClik here to view.
Perfboard resizing how to do
You need to click the "set board size" button (actually bar) just under the col/row settings for the change to occur (with the perfboard in breadboard selected). The only stupid question is the one...
View ArticleClik here to view.
Perfboard resizing how to do
vanepp thank-you!Problem was/is I'm using the german fritzing setup. While in the english one it is correct called "set board size" in the german one it is just called "Leiterplattengröße" (board...
View Article555 IC Will not align with pins in center of Breadboard
Since it sounds like you are just starting with Fritzing and won't have any custom parts etc I would suggest purging everything that has to do with Fritzing and do a fresh install. You will have to...
View Article555 IC Will not align with pins in center of Breadboard
Clearing and reinstalling is probably a good bet. The user files (that won't be touched on a reinstall) should be in /Users/username/Documents/Fritzing/parts~/.config/Fritzing on a Mac (where I expect...
View Article555 IC Will not align with pins in center of Breadboard
Just thought I would add on Linux the hidden config files are in the same place as on a Mac. home/.config/Fritzing
View ArticleRJ11-6p6c pcb socket
OK, I think the pcb view on this one matches the Molex data sheet. Before cutting a board I would suggest printing out the footprint at 1 to 1 and putting a socket on it to make sure it is at least...
View Article