Rj-45 hanrun hr911105a jack
A tip when you are drawing parts is to put down a 0.100" grid first, and snap to grid. Yeah the connection nodes in SCH need a tweak.
View ArticleQuality check of PCB designs
It's good practice to not have sharp 90º corners, but 45º ones. In Routing press DRC check, then in the error box click on each one and fix the errors on the board.
View ArticleCan't move label on bottom mounted stepper
It is not a flip button... In the Inspector, next to pcb layer, you select which side of the board you want the part on. If the part is on the bottom and you want the move it to the top... select top...
View ArticleClik here to view.
Can't move label on bottom mounted stepper
"Well there's your problem" Type 8825 in the search box.Pull the purple stepper in.In Inspector is the Placement/pcb layer greyed out, or is the box active. Mine is blank greyed out.location and...
View ArticleClik here to view.
Quality check of PCB designs
Power board means for me high current.So, you could use track width 48mil (there is a lot of free space). Controller board: JP2 to JP7 are under an other component. Is it really what you want? You may...
View ArticleClik here to view.
Can't move label on bottom mounted stepper
Same part... different variant... Pololu DRV 8825 Stepper Motor CarrierThis is the one in my library... 8825.jpg694x526 47.3 KB
View ArticleQuality check of PCB designs
Yeah that's another thing. In track width you can manually punch in any value up to 0.120" in to the Inspector.
View ArticleCan't move label on bottom mounted stepper
My Variant 2, the green one, also doesn't have pcb layer.
View ArticleCan't move label on bottom mounted stepper
Send me Variant 1 and I will load it in my library. Also, the schematic in my Variant 2 is huge.
View ArticleCan't move label on bottom mounted stepper
Yes on var2 I'v got 2 purple var 1 one with silk, one with out. with silk.Pololu DRV 8825 Stepper Motor Carrier, High Current.fzpz (207.9 KB) Do you have Fritz 0.9.3 ---- 186.786KB or 186.482KB
View ArticleClik here to view.
Can't move label on bottom mounted stepper
fritzing.0.9.3b.64.pc ---- 186.482KB 8825_img2.jpg660x502 41.9 KB
View ArticleCan't move label on bottom mounted stepper
They are both fritzing.0.9.3b.64.pc. The 186.482KB was the first release, but when there was so many install problem I went it and downloaded it again and found the file was the bigger 186.786KB....
View ArticleClik here to view.
Can't move label on bottom mounted stepper
Old_Grey: mine is b04.19 Mine is also b04.19 You broke it...
View ArticleClik here to view.
Can't move label on bottom mounted stepper
I break everything. Did you load the MS api thingy. This PC worked straight off the bat without adding that. My other PC needed the api so i might check that one. EDITMy other PC has the api, but has...
View ArticleRj-45 hanrun hr911105a jack
Sorry, forgot to attach a datasheet for reference. http://elecfreaks.com/estore/download/EF01012-HR911105A.pdf
View ArticleClik here to view.
Does anyone have or willing to create a part relay (HK19F)
I found the following which is the same layout but with different pin spacing. Library part won't net in PCB view, nets in Schematic view I did a quick cleanup in the xml editor, and added copper0 and...
View ArticleDoes anyone have or willing to create a part relay (HK19F)
Yeah. You have to unzip it and mod the svgs.
View ArticleDoes anyone have or willing to create a part relay (HK19F)
I guess what you are trying to say... you want me to make the part for you. All three .svg's need to be redrawn in a graphics editor, it would be very difficult to fix it in a XML editor.
View ArticleClik here to view.
Does anyone have or willing to create a part relay (HK19F)
steelgoose: I guess what you are trying to say... you want me to make the part for you. It would be great if you could, but also understand if you don't have the time. steelgoose: All three .svg's...
View ArticleDoes anyone have or willing to create a part relay (HK19F)
Do you have svg drawing experience, as it actually takes longer to explain it than to do it.
View Article