Clik here to view.
INA125P Instrumentation Amplifier
ina125P_.fzpz (9.7 KB) The part id is now different. These are the schematics of the file above: ina125_breadboard.png1920x1088 150 KB ina125_schematic.png1920x1088 193 KB ina125_pcb.png1920x1088 185 KB
View ArticleClik here to view.
INA125P Instrumentation Amplifier
That looks better . Still two minor problems: the icon is still 8 pin, to fix that either copy the breadboard.svg file to the icon.svg file (using the correct file names) or in parts editor in icon...
View ArticleRoland TR-808 Bass Drum Breadboard Project
I got the Adafruit power supply, in the description for the product The black wire is your every day classic +12VDC with center positive. The white wire is the negative supply, its also center...
View ArticleClik here to view.
Roland TR-808 Bass Drum Breadboard Project
From reading the data sheet from adafruit this should do the job: power_bb.png2661x777 264 KB the white wire from the wall wart has +12V on the center pin and ground on the barrel, so the center pin...
View ArticleClik here to view.
INA125P Instrumentation Amplifier
Thank you for input. Some part have full icons some not. The 74HC595 IC has 16 pins but it's icon is trimmed to 8 and I took that example. I did a 16 pin icon of before mentioned IC (icon on the far...
View ArticleClik here to view.
Roland TR-808 Bass Drum Breadboard Project
I just came across this on ebay which would replace the Murata at less cost (but long delivery). ebay.ca 3W DC-DC Boost Converter 3.3V-12V to ± 15V Voltage Regulator Power Supply Module... 3W DC-DC...
View ArticleCan't seem to bring LEDs to front
Holy carp, that was a bit of work. I couldn't get the trick to work. If you're interested, I remember VAN making a LED that is smaller because it's more a top view, and because it's smaller it might...
View ArticleClik here to view.
Can't seem to bring LEDs to front
Old_Grey: Holy carp, that was a bit of work. I couldn't get the trick to work. It's pretty random. I can usually get it between some combination of CTRL+SHIFT+[ with some parts and CTRL+SHIFT+] with...
View ArticleCan't seem to bring LEDs to front
Talk about inconsistent, no luck here. FZ has a redraw bug where if you get odd-ball stuff it can only be corrected with a close and open, so it's lucky that you got it in between that. I think the...
View ArticleCreating a new part PIC16F887
Hi all,I am trying to create a new part for the library, the PIC16F887, unfortunately I have some problems, can somebody help me enhancing the quality of this part, I added description of pins and...
View ArticleClik here to view.
Roland TR-808 Bass Drum Breadboard Project
Thank you for that. I tried connecting the jacks like you have drawn but it seems odd, I was testing to get the 24V across the leads but I don't see that. I think the powersupplies are already...
View ArticleClik here to view.
Raise and Lower command does not work on some components
Hi All, Some components will always overlap on other components, ignoring the Raise and Lower commands (v0.9.2) Please refer to the following video. The "Breakout" component will always overlap the...
View ArticleRoland TR-808 Bass Drum Breadboard Project
Something about that doesn't look right. If you measure between the black and red leads on the connector to the white cable from the adapter do you see +12V? If not, I'd check the wiring on the...
View ArticleCan't seem to bring LEDs to front
Looks like that only works for the red version though, when I change to blue it goes back to the normal size one. I originally suggested editing the part so I 'll have a look at it (a quick try ran in...
View ArticleRoland TR-808 Bass Drum Breadboard Project
Yes, I see +12V when I measure : red probe -> red lead, black probe -> brown lead for both the white and black jack. I expect this.
View ArticleClik here to view.
Raise and Lower command does not work on some components
A very similar issue is being discussed in the "can't seem to bring leds to the front" tread here: Can't seem to bring LEDs to front Looks like that only works for the red version though, when I...
View ArticleClik here to view.
Roland TR-808 Bass Drum Breadboard Project
j303: Yes, I see +12V when I measure : red probe -> red lead, black probe -> brown lead for both the white and black jack. I expect this. Ah, I think I see the problem. The brown wires appear to...
View ArticleCreating a new part PIC16F887
You have a number of problems, I expect mostly from where you started out. Your schematic svg is unpopulated which is why its blank, breadboard looks mostly ok but the chip label is in the wrong spot....
View ArticleRoland TR-808 Bass Drum Breadboard Project
So given that the ground is internal, where do I connect ground?
View Article