Clik here to view.
Inkscape Icon bug
If you are using the XML Editor in Inkscape and your buttons are faded/missing like this This is the workaroundKnown workarounds (0.91, lp:inkscape/0.92.x):a) close and reopen XML Editor in the...
View ArticleAtiny LED flasher with constant on
Before that you will have to translate your input voltage to a positive only voltage between 0V and +5V.Here is an example making this:LED diver.fzz (3.8 KB) You will have to connect ADC signal to an...
View ArticleCompact top view on breadboard
I also think this is needed. Components keep obscuring each other and I need to move components out of place in order to see what's underneath.
View ArticleCompact top view on breadboard
(post withdrawn by author, will be automatically deleted in 24 hours unless flagged)
View ArticleClik here to view.
Compact top view on breadboard
Old_Grey: What this. Is this a trick question? ... Or are you just having a very bad day...
View ArticleCompact top view on breadboard
(post withdrawn by author, will be automatically deleted in 24 hours unless flagged)
View ArticleClik here to view.
ESP3212 Wifi Bluetooth Combo Module
ESP3212 Wifi Bluetooth combo module is ultra high performance and ultra low-power consumption Wi-Fi and Bluetooth combo wireless platform based on ESPRESSIF ESP32 chipset. ESP-3212 integrates...
View ArticleCreating parts with movable schematic elements
Is it possible to create a part where I could move elements of the part around within the schematic view?For example; When using TL074 quad Operational Amplifiers I have to make a huge work around. I...
View ArticleClik here to view.
Creating parts with movable schematic elements
Yes, although it sucks you in to parts creation hell . It is described in the fpz file format document at https://github.com/fritzing/fritzing-app/wiki/2.1-Part-file-format Someone recently posted...
View ArticleAtiny LED flasher with constant on
For your level translation problem a simple resistor level translator will get you to ttl levels and a 74hct level translator will get you to the cmos levels that the 328 in an Arduino wants....
View ArticleClik here to view.
Compact top view on breadboard
Yes, a top view of NPN and LED, so that both take as less area as possible. THX1138 also had this kind of wish in order to avoid overlaying of components. And three years ago this "top view" wish...
View ArticleCompact top view on breadboard
OK, I can do that... I should have these tomorrow for you... It would be nice to have various breadboard images selectable for the same part.
View ArticleAtiny LED flasher with constant on
Mostly for noise margin and speed of the edge reasons. The noise margin is already pretty low since the high and low levels are near the margins (and much worse than a typical chip output'smargins)....
View ArticleCould I use it for non arduino, raspberry pi project?
Could I use it for generic circuit which is not arduino or raspberry pi oriented project ?
View ArticleCould I use it for non arduino, raspberry pi project?
If you are talking about Fritzing... You can use it for anything...
View ArticleConnector terminal format in the svg file
I expect this is probably a question for the developers, but perhaps one of the more experienced parts makers may know: is there a reason that the connector0terminal width in (for instance the generic...
View ArticleConnector terminal format in the svg file
The connector0terminal usually has no color, no fill or lines... in other words, it is invisible. It can be a line, square, circle, etc. The wire will snap to the center... the middle of a line or the...
View ArticleClik here to view.
Compact top view on breadboard
uka001: My original post was really about the top view of the breadboard and a vertical view of some components such as LED and NPN in order toget enough space for Rs and Cs and their wiring in the...
View ArticleConnector terminal format in the svg file
If you click on the node in Ink XML Editor the node should select in the main window, if you have arrow select button pressed, then just change the location and size in the top toolbar - watch the...
View Article