Fritzing on iPad
Development on Fritzing is mostly stopped. A few of us are trying to fix some of the bugs but it is going slowly. Your best hope (other than getting the source and trying to do a port yourself) may be...
View ArticleSmall Transformer 14x19x15h
I don’t know if anyone would want this because they seam to be non existent these days. Small Transformer - 14mm sq core - 19mm wide - 15mm high - 2 Primary pins - 3 Secondary pins v1 -...
View ArticleNeon Lamp - wheat bulb
This one needs fixing to make it good, but it works. Don’t know how to draw a glass wheat bulb in BB view. For some reason the outline is grey in PCB view. Neon Lamp 6mm x 16mm to tip v1 - Neon...
View ArticleTrigger Coil Transformer
This triggers Xenon Flash tubes Trigger Coil Transformer v1 - Trigger Coil Transformer.fzpz (7.7 KB)
View ArticleClik here to view.
How to draw a dotted line in schematic?
Alternative approach: Drag the ‘Text’ part into schematic, change the Type from Text to Image and load your drawing of the shape… Note: there are several different ‘Text’ parts so grab the correct...
View ArticleStripboard / Veroboard does not work properly. :(
Steps I took that resulted in the problem: Extended stripboard beyond the default value. The extended area is created as all tracks connected matrix, not strips. What I expected should have happened...
View ArticleStripboard / Veroboard does not work properly. :(
It helps to do a search for your problem before posting. All it took was a search for the word stripboard in the forum and the first result was Stripboard / Veroboard extension not working correctly...
View ArticleClik here to view.
SIP3 Switching Voltage Regulator in PCB-View
Hi all, for my actual project i’m using a Recom R-78E5.0-0.5 SIP3 switching voltage regulator. Sadly i couldn’t find that part in fritzing Is there anything similar i can use for creating a pcb with...
View ArticleSIP3 Switching Voltage Regulator in PCB-View
I had a look at the datasheet and it looks to have three pins spaced on 2.54mm centers. That means you could use a mystery part or generic header set to three pins and hide the silkscreen. You would...
View ArticleClik here to view.
Small Transformer 14x19x15h
I think they are still used around here since those are for educational projects at most electrical careers. Good one
View ArticleSmall Transformer 14x19x15h
I’m trying to build a strobe - it used to be popular 30 years ago - to check ignition timing, but when I look for small transformers, 600V caps, Xenon bulbs, trigger transformers, there aren’t many,...
View ArticleSmall Transformer 14x19x15h
Go to your local thrift store or pawn shop and get some old film cameras with built in flashes. They have everything you need. You used to be able to go to photo finishing places and get the used...
View ArticleSmall Transformer 14x19x15h
I saw some strobe projects online using a camera flash, but I thought that they might not be readily availible to everyone. What I’m trying to do is come up with a simple cheap circuit with easy to...
View ArticleHum-900-prc part
I am looking for this part if anyone has it or wants to make it for me let me know thanks https://www.digikey.com/product-detail/en/linx-technologies-inc/HUM-900-PRC/HUM-900-PRC-ND/7691362
View ArticleClik here to view.
SIP3 Switching Voltage Regulator in PCB-View
A 7805 voltage regulator will give you the pads and a mostly suitable schematic. The silkscreen on pcb will be a little small as your module is wider than a TO220 case. If you need the real outline in...
View ArticleClik here to view.
Small Transformer 14x19x15h
Old_Grey: I have a simple LED timing light working, but it has problems and is rather weak. This one is cheap and only uses 11 easy to get parts, and if I can make it better I won’t worry about the...
View ArticleHum-900-prc part
While it wouldn’t be that difficult to make a custom part for this device, a look at the data sheet indicates that the embedded antenna (which I think is needed for this particular part as it doesn’t...
View ArticleClik here to view.
Small Transformer 14x19x15h
That remined me that have an old junkshop 7 LED torch, but after testing it wasn’t that bright. I also have a new COB torch which is bright, but if phosphor has lag it’s probably not ideal. The...
View ArticleHum-900-prc part
I think it’s one of those modules that sit on a PCB like a SMD part, so he proabaly only wants the footprint to loacte it on a PCB.
View ArticleHum-900-prc part
That is correct, but the module specified appears to need an on board antenna (it isn’t on the module) and the antenna needs a 4 layer board that AFAIK Fritzing won’t make (leaving aside the...
View Article