Clik here to view.
ADV7391 Properties
Check the data sheet. To use an advanced chip such as this you need to read and re-read it as many times as it takes to understand all of its functions and how they interact before you try and build...
View ArticleClik here to view.
Arduino Mega 2560 Shield v2.0
It looks like your problem is the fzp file. The terminals look to be there and correct in the schematic svg, but aren’t in the fzp file. For example connector9 (the first one I happened to try in...
View ArticleHow to draw a dotted line in schematic?
I’m not sure there is a way to draw a dotted line in schematic (although someone else may know a trick), you might look at the schematic frame (a drawing title box) which I think can have a box around...
View ArticleProblems with the format of the schematic.
While @sublimeartistry is correct that you could recreate this circuit from the parts (you would need to find them all though as some of them are unfamiliar and thus are probably custom). This appears...
View ArticleClik here to view.
Arduino Mega 2560 Shield v2.0
vanepp: So your easiest solution is likely to use a text editor to add the missing temrinalId fields to the connectors that don’t have one in the fzp file. Yes, that’s what I am gonna do. But I don’t...
View ArticleHow to draw a dotted line in schematic?
Thank you Peter. It seems odd that there isn’t a way to do this. Over the years I’ve designed many circuits that had optional sections where one could leave out parts that may not be needed. I can see...
View ArticleClik here to view.
How to draw a dotted line in schematic?
I have a workaround for you. In the core parts under the schematic section you will find a text part. Drag it out and type in a series of dashes and spaces to make a line. Then copy that line four...
View ArticleProblems with the format of the schematic.
I can not find the following new components: WiFi NodeMCU board ESP8266 (CP2102) DHT22 MH-Z19 OLED LCD 0.96 (32*128) Two-way 4-channel converter of logic levels 3.3-5V RF 433MHz transmitter RF 433MHz...
View ArticleHow to draw a dotted line in schematic?
Sheer genius! It looks like that should work, I’ll try it. Dennis
View ArticleHow to draw a dotted line in schematic?
It worked perfectly! Thank you so much. It would still be a nice feature to have in the software to be able to just draw a dotted line. Dotted lines are also used to show that two parts are connected,...
View ArticleClik here to view.
Arduino Mega 2560 Shield v2.0
While I didn’t check all the pins in schematic, the check script doesn’t object to anything (except the terminalIds in breadboard which aren’t in the svg but that’s fine) but it looks fine. In...
View ArticleClik here to view.
How to draw a dotted line in schematic?
k1ypp: I’m doing a design for a magazine article. I guess I could print it out, draw in the dotted line and then scan that. Another alternative to @sublimeartistry 's suggestion above would be to...
View ArticleProblems with the format of the schematic.
In general I use google with a search term that starts with Fritzing part such as “Fritzing part nodeMCU cp2120” which will find you some of the nodeMCU parts. Unfortunately there are several of them...
View ArticleClik here to view.
Problems with the format of the schematic.
Искренне благодарен за развернутый ответ. Но через вялотекущие процессы на этом форуме, вчера нашел практически все компоненты сам, а LM7805 не нашел, поэтому подредактировал LM1117. Успехов!...
View ArticleClik here to view.
Captcha error when signing up
While signing up for this site, I saw the captcha needs looking at.
View ArticleHow does parts creation get started
I see the parts menu, but there is nothing I can select, is is all greyed out. Can i create a part with my own lead spacing? I need to create an audio transformer that has 5mm between leads on each...
View ArticleOp-Amp example with audio in going to Amp out
I am working on designing an op-amp audio amplifier with digital audio level control and using the project http://fritzing.org/projects/op-amp-audio-amplifier as my template. The template shows that...
View ArticleClik here to view.
How does parts creation get started
Parts making is fairly complex although a transformer isn’t a big deal. If you are set on making your own part the best place to start is type “transformer” in to the parts bin search bar (the...
View ArticleOp-Amp example with audio in going to Amp out
I think the basic answer is that the project you started from likely doesn’t work as shown. The original project doesn’t have schematic routed (and I am too lazy to try and route it), but looking at...
View ArticleFritzing on iPad
7 year ago there was a forum where the possibility of fritzing on iPad may be possible if Qt supports it. Since then, there was no words. Will fritzing iOS version ever be supported?
View Article