Clik here to view.
Part image is visible in Editor but not Sketch
Thanks for your patience, try this. The image was visible in the parts editor, is that where you tried it?
View ArticlePart image is visible in Editor but not Sketch
I edited your post to make the picture bigger and as you can see it is only the header and the background is missing. Can you upload just the background SVG that you want in the part or is that what...
View ArticleClik here to view.
Part image is visible in Editor but not Sketch
The file I sent does not appear to be correct. I see the image in inkscape and the editor!
View ArticlePart image is visible in Editor but not Sketch
I know there are some special requirements for Breadboard SVG so hopefully @Old_Grey or @vanepp can chime in and possibly let us know why this happens.
View ArticleClik here to view.
Part image is visible in Editor but not Sketch
Here is the file I added… Rpi_Leaf.svg210x574 431 Bytes
View ArticleClik here to view.
Part image is visible in Editor but not Sketch
I am trying again as I don’t see a file in my last reply Rpi_Leaf.svg210x574 431 Bytes
View ArticlePart image is visible in Editor but not Sketch
Strange I even looked at your post via edit and you did upload an SVG of a considerable size but when I save as and open in Inkscape it is completely empty. It is fairly clear that the SVG is the...
View ArticlePart image is visible in Editor but not Sketch
Thanks for your efforts! I’ll continue to investigate.
View ArticleClik here to view.
Part image is visible in Editor but not Sketch
I put it up on Dropbox and I seem to be able to see it… Dropbox Fritzing Shared with Dropbox
View ArticlePart image is visible in Editor but not Sketch
That is an embedded image not an actual vector graphic. I do know it is possible to use such an embedded image but I am not sure how. @Old_Grey has a video tutorial series that I believe has...
View ArticlePart image is visible in Editor but not Sketch
Interesting, I believed I saved as “Plain .SVG” (vs .SVG). I’ll continue to experiment. Thanks for the help.
View ArticleClik here to view.
Part image is visible in Editor but not Sketch
Here is @Old_Grey video tutorial on using an embedded picture. Fritzing PART CREATION Video Tutorial Series Fritzing Part Creation - Chapter9 - Using Photo and PDF for Parts Using photos and PDFs for...
View ArticlePart image is visible in Editor but not Sketch
Thanks, I’m also trying to recreate as a native .svg vs. using a bitmap.
View ArticlePart image is visible in Editor but not Sketch
I assume the RPi_Leaf.svg is just a png imported into INK. To convert it to a svg path you go Path/Trace to Bitmap. Press Update at each change to see what happens. Select colors in Multi scans. Turn...
View ArticleProject won't load
I get an error that says there is “no sketch found” in the project directoy I can unzip the project and all the parts files are present. How can I recover the project ?
View ArticlePart image is visible in Editor but not Sketch
I re-created using inkscape elements and came up with this which seems to work. I did try Trace to Bitmap but I think this is much better. Thanks for the guidance. Raspberry Pi Header 40pin.fzpz (24.9...
View ArticleClik here to view.
I cannot find a part
I cannot find a Silicon Controlled Rectifier part in the core parts or in any other place .
View ArticleProject won't load
This doesn’t help, but someone had a FZ crash and his files weren’t recoverable.
View ArticleIncorrect Auto Route for 7 Segment Display
i just created a simple circuit which includes 5 pcs 74HC595 shift register and 5 pcs 7 segment displays. Since i live in Austria i need to buy the 7 segment displays on the local market. The order of...
View Article