BMP180 sensor part
bmp180 sensor parts ? BMP180 Barometric PressureTemperature Altitude Sensor_2-1000x750.JPG1000x750 91.8 KB
View ArticleDo anyone has Current Sensor ACS712 part?
Or I can just upload it for you from that site: ACS712_Current_Sensor.fzpz (115.1 KB) Peter
View ArticleI stuck in PCB trace! Help!
Felcon_Fighter: I used that calculator before this forum stuffs. But always shows me some weird values. That’s why I posted it in forum. By default it is in mils (1/1000 of an inch) thus the trace is...
View ArticleBMP180 sensor part
A google search for “fritzing part bmp180” turns up a number of hits. The adafruit one is probably out, this isn’t an adafruit part but one of the others may do. If you can’t find a match post again...
View ArticleI stuck in PCB trace! Help!
vanepp: What Fritzing version? using 0.9.3(b04.19) but still can’t get 255 on width …it remains 25 , last 5 of 255 can’t be typed. Capture.PNG799x720 65.3 KB
View ArticleI stuck in PCB trace! Help!
If you upload the .fzz file of your sketch, I’ll try it on 0.9.3b and see if I can figure out what is wrong. For me (as you see in the images) it accepted me typing 255 over the default 24. You may...
View ArticleExport for Production (Etchable PDF) for UV process
I have been using the PDF output to produce my PCB’s. Recently I have change to using UV film PCB board. The output of the Etchable PDF needs to be inverted to use this process. The track lines need...
View ArticleI stuck in PCB trace! Help!
Looks like my mistake. On 0.9.3b it is limited to 128 as a max value, on 0.9.4 pre release it allows 256. I suspect this is an unintentional improvement though, probably due to the new QT version in...
View ArticleExport for Production (Etchable PDF) for UV process
While I’m not at all familiar with any of the etchables, a work around that should work is to use export as svg instead and then with a text editor edit the svg file and alter all the #00000 (black)...
View ArticleExport for Production (Etchable PDF) for UV process
In addition to editing the XML, as @vanepp indicated… Most drawing/graphics programs have ability to change colors via doing things like Invert, Replace, Filter…etc. Inkscape has several ways of doing...
View ArticleExport for Production (Etchable PDF) for UV process
If you want, you can describe this exact use case (and why other export options are not an option) , and submit a feature request at github. It could be made as a simple select field in the pdf export...
View Article2.1mm Barrel Jack with Terminal Block
2.1mm Barrel Jack with Terminal Block.fzpz (9.3 KB)
View ArticleArduino-Sensor-Shield-v5.0
Arduino-Sensor-Shield-v5.0.fzpz (63.5 KB) sensor_shield.png504x504 52.3 KB
View ArticlePart creation howto part 1 breadboard and pcb
Someone in this forum post http://forum.fritzing.org/t/tarjeta-s4a-edu-pieza-en-proceso-solamente-falta-la-imagen-en-pcb-y-en-esquematico/7487 requested help to fix up a part. So while doing that I...
View ArticlePart-creation-howto-part-2-schematic
Since we did breadboard and pcb in part 1 here: Part creation howto part 1 breadboard and pcb Tutorials - Guides - How to's - & Experiences. Someone in this forum post requested help to fix up a...
View ArticleCurrent sensor 5A ACS712
Current sensor 5A ACS712 Current Sensor 5A.fzpz (19.3 KB) Another version is here Do anyone has Current Sensor ACS712 part?
View ArticleDo anyone has Current Sensor ACS712 part?
Another version is here Current sensor 5A ACS712
View Article