Led On off First 1
Do you have a question? If so I’m not clear on what the question is. Peter
View ArticleTarjeta S4A EDU, pieza en proceso solamente falta la imagen en PCB y en...
Since I see the forum doesn’t seem to have noticed the edit, there is an error in the posted part which I have corrected and posted a new version replacing the old one. If you have downloaded this...
View ArticleSewable LCD Mounting Board (PCB)
Coolness! I’ll take a look at that tomorrow. (The ability to unplug would be good, but it’s not a deal-breaker.) And like I implied earlier (or at least tried to), I’m not doing much with it right...
View ArticleArduino & Fun Robotics for Children
Ohh wow, I also have this, I bought it from Black Friday coupons at Reecoupons, for my son, because it enhance its knowledge and way of his thinking, I suggest every parents must buy this for their...
View ArticleClik here to view.
Do anyone has Current Sensor ACS712 part?
I need Current Sensor ACS712 part of the image following…(width 13mm and length is 31.2mm). I am newbie and I can’t build parts. Do anyone have this part? please help me out. original.jpg1920x1080 102...
View ArticleI stuck in PCB trace! Help!
fritzing can provide 128 mil highest in pcb trace. And my local market provides 1oz copper pcb board. I need 30 amps to pass. For 1oz copper pcb how much trace should be used for my 30 amp connection??
View ArticleDo anyone has Current Sensor ACS712 part?
As always google is your friend (and the first place to start when looking for Fritzing parts). A search for “fritzing part ACS712” turns up a variety of options. I’d use this one (his parts are...
View ArticleClik here to view.
I stuck in PCB trace! Help!
Felcon_Fighter: fritzing can provide 128 mil highest in pcb trace. Actually Fritzing will provide a maximum 255 mil trace if you type 255 in to the trace width field. The 128 mil width is only the...
View ArticleSewable LCD Mounting Board (PCB)
Yeah, it looks like something like this would be just the ticket, in actual practice. The good news is that, unless there’s something there that I’m missing, I wouldn’t even (necessarily) have to...
View ArticleSewable LCD Mounting Board (PCB)
You may need to adjust the hole size down a bit, the pins on these are IC size (which Fritzing uses a 0.035in hole for rather than 0.038in. As I recall (I don’t have one to hand) there is a larger lip...
View ArticleSewable LCD Mounting Board (PCB)
The Harwin pins I found (link above) don’t appear to have that issue, and $3.80 for a strip of 30 (since 16-18 would be needed for this project) doesn’t seem too bad. Plus, I can keep researching...
View ArticleSewable LCD Mounting Board (PCB)
It isn’t quite as big as the ones I have but it is there. From the digi listing, the mechanical drawing shows the lip: cdn.harwin.com D01-992.pdf 84.82 KB it looks to be only .5mm, and the one...
View ArticleClik here to view.
Email notifications are broken at present
At present email notifications of new posts or replies is broken. I think the web site may be sending them (although I’m also not sure that is true either .) The web site is old and pretty broken...
View ArticleSewable LCD Mounting Board (PCB)
How much of a problem would it actually be to leave the holes at 0.043"? Would 0.008" really be that significant? (I haven’t soldered anything in many, many moons.)
View ArticleSewable LCD Mounting Board (PCB)
Solder isn’t all the strong, you usually want a fairly tight fitting hole to provide mechanical strength, and in this case you are going to have movement as well which will make things worse, so I...
View ArticleClik here to view.
Sewable LCD Mounting Board (PCB)
Well, that’s part of what the mounting holes are for. I’m working up some spacers even at this moment.
View ArticleI stuck in PCB trace! Help!
(post withdrawn by author, will be automatically deleted in 24 hours unless flagged)
View ArticleDo anyone has Current Sensor ACS712 part?
Thanks peter. I searched in google. I found this link but i could not get any access from my country . Don’t know why !!! So now i am going to use vpn . Generally I don’t use 'em.
View ArticleClik here to view.
I stuck in PCB trace! Help!
I used that calculator before this forum stuffs. But always shows me some weird values. That’s why I posted it in forum. vanepp: Actually Fritzing will provide a maximum 255 mil trace can’t type 255....
View Article