Wemos D1 mini PCB protective areas rotated
Well it looks like all the parts have faults.V1.0 is dead because the produced Gerber is wrong and the holes are too big. Basically it's obsolete and should be discarded.V2.0 isn't perfect because it...
View ArticleWemos D1 mini PCB protective areas rotated
I am not sure exactly what you want... Try this one, then let me know which way to go...WeMos D1 Mini - Male Pins.fzpz (44.1 KB)
View ArticleWemos D1 mini PCB protective areas rotated
PCB views are not the same with "male above" unfortunately, I tried that. They are rotated and do not fit the same PINs
View ArticleHelp please: Switching between sets of pots
(New to the forum;first post) Frustrated but think I have a workable solution. My project (a guitar pedal faceplate) calls for the use of 8 pots but my UNO only has 6 digital pins. So... I decided I...
View ArticleClik here to view.
Wemos D1 mini PCB protective areas rotated
They are all the same on mine. 1d5alqycd4b3dzv6g.jpg1024x526 155 KB Doesn't matter Steel fixed it.
View ArticleWemos D1 mini PCB protective areas rotated
Am I missing something here... I have three versions "Female Above, Male Above", and the one I just modified "Female Above - Male Pins", and they all work correctly in my FZ. What needs to be...
View ArticleWemos D1 mini PCB protective areas rotated
All the FZ ones are wrong and all need to be fixed, as per stated above. The 3 faulty FZ parts on left, your new part on right.
View ArticleWemos D1 mini PCB protective areas rotated
@tzn You did not answer my question "What needs to be modified"... What exactly would you like me to do to make a non-faulty FZ part. What size do you want the holes, rings, ect., or what ever else...
View ArticleWemos D1 mini PCB protective areas rotated
Sorry for that, I'm still pretty new to this stuff, just working on some community project (air quality monitoring) Anyway, what I usually do with Wemos is to solder standard, 2.54mm through hole male...
View ArticleClik here to view.
Wemos D1 mini PCB protective areas rotated
I changed the drill size to the standard 1mm holes with 0.508 solder ring for the standard 0.1" (2.54mm) pitch headers, I set the breadboard view to male pins so it will attach to the breadboard. I...
View ArticleClik here to view.
Wemos D1 mini PCB protective areas rotated
Thanks, will check. Another question: is there any way to update the parts so I don't lose connections? Pin names are the same, I would expect that it should be possible to swap part somehow, actually...
View ArticleWemos D1 mini PCB protective areas rotated
Sure, there are a couple of ways; After saving my part in FZ, save you project, close FZ and reopen for the metadata to take effect. Click on the WeMos, then in the Inspector, under headers, click...
View ArticleHelp please: Switching between sets of pots
A Uno actually has 14 digital input pins, but only 6 analog pins. If you are actually trying to interface pots, then yes you would need to multiplex some of the analog ports, however your drawing...
View ArticleHelp please to edit a component in inkscape and then use it
If you post your part here we could probably make better suggestions for changes. A quick look at car relay in core indicates to me it is pretty broken though.
View ArticleClik here to view.
Wemos D1 mini PCB protective areas rotated
Old_Grey: V1.0 is dead because the produced Gerber is wrong and the holes are too big. Basically it's obsolete and should be discarded.V2.0 isn't perfect because it doesn't link when placed on a BB,...
View ArticleClik here to view.
Help please to edit a component in inkscape and then use it
2014-New-New-Arrival-Sealed-Auto-High-Power-Electromagnetic-font-b-Relay-b-font-font-b.jpg800x800 73.8 KB It looks like what it is supposed to be, what's broken besides the pins could look a bit...
View ArticleWemos D1 mini PCB protective areas rotated
The red only indicates that the connectors are assigned as male pins. If the pins are assigned as female then there will not be red. The breadboard has female sockets and only male pins and wires will...
View ArticleWemos D1 mini PCB protective areas rotated
From memory the order of the pic was v2.0 male above, V2.0 female above, V1.0 male below, and your new male below. Shouldn't the other is male above be red.
View ArticleClik here to view.
Help please to edit a component in inkscape and then use it
While I guess broken is too strong, will ugly do ? Untitled Sketch_bb.jpg594x651 61.6 KB while technically the connections work, the presentation however is ugly. I think the terminals at least in bb...
View ArticleClik here to view.
Wemos D1 mini PCB protective areas rotated
The male above and female above was not referring to the pin assignment. I believe they were referring to the header type on top of the board in the breadboard view. The female above showed headers...
View Article