Servo connector (male and female)
Thank you for that. We RC hobbiests call this “servo”. But, yes it’s a motor. I guess I need to make one myself . But the view would be like from my screenshot. I found that in a Fritzing picture, so...
View ArticleClik here to view.
Servo connector (male and female)
There is a servo in core parts (with three wires unlike the motor above which only has two.) capture1132×399 64.2 KB It is configured with bendable wires so you can extend the wire as I have done with...
View ArticleProgram DO-201 Is it on the?
I do not understand exactly everything you are explaining to me, I changed the connection of the transistor because it worked but indeed it was connected backwards. I did some test with the base of...
View ArticleI need voice recognition module part
To find or make a suitable part we would need the spec sheet (connections and mechanical drawing preferred) of the voice recognition module you want to use. Peter
View ArticleClik here to view.
Program DO-201 Is it on the?
Halzote: I’m sorry I’m taking a long time because my health prevents me from concentrating at the moment (nothing serious, just binding ^^) Nothing to be sorry for, reply when ever you can, I’m not in...
View ArticleHow to resolve electronic mail related issues faced Att.net?
Hi! We offer help for the entirety of the difficulties related to Att net . We were supporting our clients dealing with any electronic mail related issues. We have a gathering of experts who offer...
View ArticleSet picture on surface of pcb
hi at all, I’ve following problem: I tried to set a picture/logo on the surface of the pcp. I’ve used the “silkscreen image” tool in the core parts. I changed the picture file but I only get vertical...
View ArticleClik here to view.
Water pump/motor part here!
HELLO,I SEARCH FOR THİS PART BUT I CAN FİND,SO I MAKE IT .GOOD FRİTZİNGS WATER PUMP.fzpz (6.8 KB)
View ArticleClik here to view.
Water pump/motor part here!
Not a bad job, but again a few problems. Breadboard lacks a layerId, and is dimensioned in px (although the scale is correct in both Fritzing and Inkscape despite that.) The motor part you cloned from...
View ArticleClik here to view.
Modify 8x8 matrix
I would need a 32x32mm MAX7219 8x8 LED Matrix part that is using SPI. This is the actual module: https://robotdyn.com/matrix-led-8x8-module-32x32mm-driver-max7219-7221.html I found the attached part,...
View ArticleModify 8x8 matrix
This part should do what you want. robotdyn-max7219-LED-matrix.fzpz (8.0 KB) Peter
View ArticleModify 8x8 matrix
Hi Peter, wow, this is perfect, thank you so much! You even caught the incorrect pin order which for some reason I missed. You just saved me from having to throw away 5 PCBs (or mess around with...
View ArticleClik here to view.
Modify 8x8 matrix
You are right, old eyes. I missed that only the other 4 pins are connected together not SDI/SDO in the schematic. It should have been obvious when I needed to add a bus entry for the SDI pins but it...
View ArticleClik here to view.
USB to CAN converter
Hello, i’m looking for a USB to CAN converter part like this: amazon.de USB zu CAN Konverter Modul for Raspberry Pi4/Pi3B+/Pi3/Pi Zero(W)/Jetson... USB zu CAN Konverter Modul for Raspberry...
View ArticleHow canva resi̇ze i̇n inkspace?
I’m not sure I understand the question. You can draw as large as you want by default, when you are done you need to do Edit->Select All then Edit->Resize page to selection. That will resize the...
View Article