Clik here to view.
Part help usb micro usb
Hi, just checking I have the correct fritzing part for a micro usb connector and is it positioned correcctly on the pcb. The pin dimensions seem correct but there are two addional holes - not sure...
View ArticleClik here to view.
Part help usb micro usb
Presumably the part this was made from had pins that yours doesn’t although they aren’t holes but marks where you could drag a hole in the sketch on to the board if you needed them (and don’t appear...
View ArticleClik here to view.
Part help usb micro usb
thanks Peter, so I get the values in the drill text file as follows: gerber drill holes830×766 58.5 KB but it’s not clear to me which holes are which - I measured the connector so it has two different...
View ArticleClik here to view.
Part help usb micro usb
The T1 number indicates which set of drill X/Y coord will be that size, so you need to move to that coord in the gerber viewer (this is gerbv) to tell where the hole is: capture1631×860 182 KB here I...
View ArticleUSB to CAN converter
This should do what you want. There is no pcb view as it isn’t useful. There are no USB connections (although the connector is present.) Someone made some cables (with no connectors) for the Raspberry...
View ArticleClik here to view.
Unable to add silkscreen image
I’m using Fritzing Version 0.9.4 on macOS and I’m trying to place an SVG image on the silkscreen layer of my PCB. I’m fairly sure this exact image worked in the past but weirdly enough I can’t get it...
View ArticleClik here to view.
Modify 8x8 matrix
Oh no you did a perfect job in such a short amount of time! It’s clear that you are an expert. Thank you again and thank you for fixing the part. The pins are in the correct order. I just printed the...
View ArticleClik here to view.
Modify 8x8 matrix
At the last moment, I noticed another strange thing. The silkscreen in the exported Gerber files of the part are weirdly distorted. Aisler uses the .fzz file instead, which doesn’t have any issues....
View ArticleClik here to view.
Modify 8x8 matrix
otherguy: At the last moment, I noticed another strange thing. The silkscreen in the exported Gerber files of the part are weirdly distorted. Which Fritzing version are you using? This looks like a...
View ArticleClik here to view.
Modify 8x8 matrix
otherguy: I noticed one tiny last thing: in the PCB view, the connection is still called SDI-out . But that is just a label issue. Yes, I fixed all the svgs but missed the name field in the fzp file....
View ArticleUnable to add silkscreen image
That SVG image does not have any physical dimensions. Fritzing requires that to be able to scale the image to match the reset of the PCB graphics. To get it to work, I changed the svg header from:...
View ArticleClik here to view.
Unable to add silkscreen image
microMerlin: <svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"...
View ArticleClik here to view.
Unable to add silkscreen image
otherguy: Weirdly, Apple Preview, Illustrator and Inkscape all open that file just fine, and so does my browser. Only Fritzing didn’t want to play nicely. Fritzing is the only one that needs to know...
View ArticleModify 8x8 matrix
Thank you so much Peter. Third time’s the charm! And you are right, works just fine on 0.9.6 (though now there are some new bugs, but not with this part). For some reason I was still on 0.9.4. I...
View ArticleClik here to view.
Modify 8x8 matrix
otherguy: I noticed that the donation on download is now mandatory ( ish ). I hope that gets the project some well deserved money! We are all hoping that , the voluntary donation rate was something...
View ArticleClik here to view.
Unable to add silkscreen image
microMerlin: That SVG image does not have any physical dimensions. Fritzing requires that to be able to scale the image to match the reset of the PCB graphics. I hadn’t thought to look at the header...
View ArticleClik here to view.
Unable to add silkscreen image
Most of the online SVG compressors/optimizers seem to strip out the physical dimensions. I just noticed with 0.9.6 that the physical dimensions in the SVG override whatever is set in Fritzing, and...
View ArticleModify 8x8 matrix
I can see that this would make sense. Being a developer myself (well now more operations, but still) and having worked with large code bases, I can imagine that this isn’t something you could maintain...
View ArticleClik here to view.
Unable to add silkscreen image
otherguy: I just noticed with 0.9.6 that the physical dimensions in the SVG override whatever is set in Fritzing, and transformations also don’t seem to get applied – strange bug. In general gerber...
View ArticleClik here to view.
Modify 8x8 matrix
otherguy: It’s a great tool for the occasional DIY PCB that I do. I’m not an electrical engineer but I made a large 35x35cm PCB with Eagle once and that gave me a fair share of gray hair. That and...
View Article