Dear vanepp,
Thank you. The board is just the same with different pinout.
I managed it someway. I will upload as I finish.
Image is not exactly the same, but pinout will be.
Andrea
↧
Raspberry Pi Pico (cloni?)
↧
(creo que es M1 RS001B), (I think it is M1 RS001B)
That one does appear but the one I’m looking for doesn’t appear, look.
↧
↧
(creo que es M1 RS001B), (I think it is M1 RS001B)
Thanks, I found it
vanepp
↧
SSR-25-DD, Solid State Relay
I do need the fzpz file of the solid state relay I specified below. I’ll be happy if you can help me. Thank you.
ssr-25-dd solid state relay
link:
Best
John
↧
SSR-25-DD, Solid State Relay,
The part here should do what you want.
Peter
↧
↧
Dollatek DC-Booster as Element for Fritzing
Good evening from Vienna!
Is there maybe any way to add the following step up board in the library, so I can finish my project? Any help would be much appreciated!
Thanks a lot in advance!
Aleks
↧
Dollatek DC-Booster as Element for Fritzing
This part should do what you want.
Peter
↧
Keyestudio 8X8 LED Matrix
Name of the part
Keyestudio 8X8 LED Matrix
Top view
This picture shows the part from above, so that is easy to see were connectors should go, and which diameter they have.
Datasheet
The official documentation of the part manufacture is linked here:
Type
Display (DS)
Thanks 
↧
Fritzing part for a 4700 uFd electrolytic with snap in terminals
Peter: I can see clearly now. Following your instructions in an earlier posting, I created the PCB mounting hole patterns for the electrolytic capacitor and the right angle PCB mount BNC jack in Visio. I then converted the Visio drawing files into SVG images. I loaded these two images into a Fritzing PCB window as shown.
For connectivity, I loaded vias into this window, as shown. By sizing the vias correctly, I was able to drag them over the holes each image drawing.
The figures on the right show traces running from each via to the female header part to indicate electrical connection from the part to another part on the PCB.
Thank you for your support in your past postings to me!
↧
↧
Dollatek DC-Booster as Element for Fritzing
Yeah, it definitely does, thank you!!
↧
Park Request: TEENSY40-CANLIN-BRK
Are you able to help with this? Below is the link that should have everything you need. If not that is completely fine.
Thanks,
Oscar
↧
Park Request: TEENSY40-CANLIN-BRK
I can probably make a part but is going to take some time. I have become busy with non Fritzing issues and there are a number of other requests ahead of you.
Peter
↧
Park Request: TEENSY40-CANLIN-BRK
Thank you Peter, I really apricated it!
↧
↧
Impossible mini PCB
You an hide the labels and the silk screens and fatten the tracks
↧
Impossible mini PCB
Look Ma - it still works - autoroutes just fine too !
↧
Searching for HF41F SIL Relay
Hi!
Is there some update?
↧
Searching for HF41F SIL Relay
I haven’t yet had time to get to it. It will likely be a few days yet.
Peter
↧
↧
Searching for HF41F SIL Relay
↧
Convert .dxf file into fritzing part
I want to have load cell 5 click board to be include in my fritzing part. I have the .dxf file. Anyone know how to do it?
https://download.mikroe.com/documents/2d-3d-files/load_cell_5_click_2d_3d_files.zip
↧
Parts help/request for MikroElektronika STSPIN220
There are a variety of motor drivers in both core parts and available on the net (where a google search of the form “fritzing part motor_driver_name” should find available parts.) Your best bet would be to select one that has a Fritzing part already …
Peter
↧