Hello together,
I am just getting started and looking for a compact DC-DC Converter 3.3 to 12v like this one to design a PCB:
I wasn’t able to find anything similar in the library, I would therefore highly appreciate your support.
Thanks in advance!
EDIT:
I was also wondering how to include this part to a simulation circuit, if possible? - Thanks
I’m trying to build a face recognizing door lock from a youtube tutorial, but the circuit is totally broken, Need some help fixing it.
To say anything useful we would need you to upload the sketch (the .fzz file, upload is 7th icon from the left in the reply menu) and tell us what problem you are having. This circuit is unlikely to simulate as several of the parts likely won’t have spice models (camera, relay and solenoid.)
Peter
This part is likely as close as you will find.
It likely won’t. To simulate it needs a spice model in the part and there isn’t one in this part.
Peter
Hello everyone. I recently joined the fritzing community and am asking if anyone can help me out by designing a replica of an MLX90640 sensor to use in a project as a .fzpz.
Would appreciate any help here.
This one here.
A google search for “fritzing part MLX90640 module” turns up this post (which is not identical):
if that won’t do you would need to provide a web site that details dimensions of the module and a pin out of all the connections and I can create a part when I get time (although it will probably be a while since there are a bunch of requests before you and I am busy,) A picture at an angle of the module with no web site is basically useless although you did manage to provide the model number to use in the google search and the picture tells me you want a module rather than
only the camera.
Peter
thank you. Got it
John
I do need the fzpz file of the “Female DC Power Jack Supply Socket DC-005” I specified below. I’ll be happy if you can help me. Thank you.
Female DC Power Jack Supply Socket DC-005 (5.5mm x 2.1mm)
link:
Best
John
Thanks for the quick response and info, I’ll give it a try with the suggested part!
-Markus
Hi! very sorry, this is my first post her and I’m not too acquainted with how stuff works.
This is the link for where I found this sensor. I looked everywhere online and don’t seem to find any resources which I can share here. But this is the one I’m using for my project.
As far as I see, resources for this are pretty scarce but if its too difficult to extract info from that link then you can use this one here.
Hello communuity,
just working on my first project which uses a SIP reed relay and was happy to find SIP-1A05 REED RELAY.fzpz on the net.
This is exactly the part I am using and the picture shows the correct housing with 4 connectors, however in the schematic (and PCB) view the part has 7 connectors.
By trying I have not found a way to remove connenctors 5 - 7 and therefore I would like to ask for a short hint on how to get rid of these pins (or perhaps a link to a ‘correct’ .fzpz ?).
Be assured, your help is deeply appreciated,
thanks a lot,
Ralf
Name of the part
Gouuu Tech GT-U7 NEO6M GPS
Top view
I’m actually mainly interested in the bottom view though because of the pin assignments being located there.
Datasheet
Type
I did not read this
[ x] Breakout board, sub assembly, plug in module (A) (I think?)…
Antenna (AE)
Battery (BT)
Capacitor (C)
Diode (D)
Display (DS)
Fuse (F)
Hardware , mounting screws, etc. (H)
Jack, fixed part of a connector pair, header (J)
Relay (K)
Inductor, Coil, Ferrite bead (L)
Loudspeaker, Buzzer (LS)
Motor (M)
Microphone (MK)
Plug, moveable part of a connector pair (P)
Transistor (Q)
Resistor (R)
Thermistor (RT)
Varistor (RV)
Switch (S)
Transformer (T)
Integrated Circuit (IC)
Crystal, Oscillator (Y)
Zender diode (Z)
Other (please specifiy)
Footprint
Hi Peter,
this is great! Thank you very much!
A new version (with better PCB color - no CSS) and labels
MicroSD Card Module.fzpz (17.1 KB)
Alternative part with akku
RTC DS3231.fzpz (34.5 KB)
a new part from me
LDT0-028K Piezo vibration sensor.fzpz (18.6 KB)
It is available in core parts.
Peter
The .fzz file doesn’t load for me. That is likely because the 5V relay part is incorrect. If you post the .fzpz file for the 5V relay part I will have a look at correcting it.
As well you didn’t specify what the sketch doesn’t do other than simulate (which as noted is likely due to no spice models.)
edit here is what your sketch looks like here
the 5V relay part should appear in the temp parts bin (this is a reported Fritzing bug.)
Peter
Schematic has some issues. The VCC pin is correct, aligned to the grid properly, but the other pins are scaled wrong and are not aligned to the 0.1in grid as they should be.
That looks to be because the schematic svg isn’t correctly aligned
As well it lacks a layerId it needs to look like this to fuction correctly (as it stands it probably won’t export as an image)
The easiest way to fix this (assuming you are using Inkscape) is to use Randy’s Fritzing schematic Inkscape extension which will create a properly formatted schematic svg. Details of using it can be found in this parts making tutorial (along with other suggestions.)
or in this post on the extension
As well the holes in pcb are only 0.031in for 0.1in headers they should be 0.038in (again how to fix this in Inkscape is in the tutorial.) Running the part through FritzingCheckPart.py (which I haven’t done) may turn up more problems.
Peter
