Hi can someone help with my pcb design ?
I received from manufacture mail that there is no outline at the gerber file.
the shape of the pcb is customized by me,
how can i fix this ASAP ?
↧
No outline at customized pcb shape
↧
No outline at customized pcb shape
I’ve seen people talk about it in the forum so do a search for “customized pcb shape” here.
You can also upload the sketch(.fzz) with the 7th button here and maybe someone can look at it.
↧
↧
No outline at customized pcb shape
Hi,
Thanks for your answer,
i don’t know how to upload the file,
can you explain ?
Nir
↧
No outline at customized pcb shape
When you reply it’s the 7th button on the top, right above where you are typing.
I probably can’t fix it, but at least someone can look at it as soon as they wake up.
↧
No outline at customized pcb shape
Ninebot_bridge_board.fzz (11.6 KB)
↧
↧
No outline at customized pcb shape
Sorry that didn’t work - I couldn’t get the svg out of a ,fzz -.
Can you get the svg for the PCB and rename the extension to .fzpz, and upload that.
↧
No outline at customized pcb shape
shape.fzpz (1.4 KB)
↧
No outline at customized pcb shape
I found the problem,
at the layer needed to change the name of the SVG layers to silkscreen , board and silkscreen0
↧
No outline at customized pcb shape
Cool, because I was lost.
↧
↧
Review my first PCB board
Hi There,
Thanks a bunch for your thoughts.
I did another example with MPU9250 part, and pushed it to bottom layer, while keeping wemos on top. I also installed Gerbv and checked all layers. It seems ok to my rookie eyes.
On the holes, i also checked the drill.txt. the max hole is 0.038. I am not sure how to change the hole size, although am puzzled why there are different hole sizes. I simply picked the board from parts list. Shouldn’t the software determine what size hole to put in pcb for those parts [pins]. I also reduced pcb size, as i want it as compact as it can be. Unless, there are any glaring mistakes, i plan to order this pcb. do you know when it might arrive in usa typically. [roughly 2-3 weeks ??] Any recommendations on how to order ? Fritz fab or some other places ?
Can you take a final look and advise your thoughts.MPU9250_Wemos_MaleBelow.fzz (38.5 KB)
; NON-PLATED HOLES START AT T1
; THROUGH (PLATED) HOLES START AT T100
M48
INCH
T1C0.086614
T100C0.038000
T101C0.036111
%
T1<<
↧
Review my first PCB board
The hole size is determined by what was drawn in the svg, and they are different sizes because there is no posted std so people draw what they like.
You usually go to the PCB manuf site and load the gerbers and get a quote. Note: It’s best to print out the design and see if parts fit on it before sending it out.
↧
Review my first PCB board
OK THANK YOU VERY MUCH .
I printed the board on paper, and it seems to work.
gonna get some quotes and order my first board !!!
thanks a bunch to both you and Peter.
Great support.
↧
Review my first PCB board
Looks fine to me too. I was fiddling with the parts last night, but downloads completed faster than I expected (and the parts are more broken than I expected too 
). The Wemos one has translates in the pcb svg which is probably why the text is out of place (for me I would have deleted the text as it is adding unneeded clutter) and the hole sizes and pad sizes are wrong (with no documentation but word of mouth here in the forum that’s not a real surprise). The holes however look to be in the right place in the gerber and that’s what matters. being a couple of thou too big shouldn’t be a problem (too small which has also happened is a problem!) so I expect you are good to go. Eventually I hope we will be able to clean up core parts but it hasn’t even started yet.
Peter
↧
↧
Review my first PCB board
i did notice the text being out of place. i tried to delete it, but the part was also getting deleted. so i compromised. i am gonna fish around a little bit more to see where else i can change any settings. but if there is a place i can fiddle to clean up the text that would be helpful.
thanks a bunch Peter. !
↧
Review my first PCB board
Unfortunately that’s in the part as well. With the warning these are lightly tested, this pair has the holes at 0.038 and most of the translates in pcb removed. I tried to substitute them in your sketch and failed, and decided to fix the parts completely but I ran out of time. The mini has the text removed so you can put it in in the sketch if you need it (as is normally done).
Adafruit MMA8451 Accelerometer_fixed.fzpz (18.9 KB)
WeMos D1 Mini-fixed.fzpz (38.7 KB)
I think they are both new parts so should load beside your old ones to compare.
Peter
↧
Is the TSR 1-2450 in the Parts Catalog?
Thank you very much. It is very helpful.
↧
Not working plz help
when i run it it opens then just stops responding
↧
↧
Not working plz help
On which operating system, and is this your first installation or was Fritzing running previously? The likely problem is that you interrupted Fritzing when it was updating the parts repository (it appears to hang, but is actually accessing github). If that is the case you need to clear the user directories (noting this will erase all your sketches if you have any):
There are two user directories (with your parts and the parts database) which don’t get touched during an install (to not affect your sketchs during upgrades). On Windows they are in
c:\users\username\AppData\Fritzing\roaming\Fritzing (which is a hidden directory so you need to enable hidden directories in explorer) and
c:\Users\username\My Documents\Fritzing (where username is your windows id)
If you don’t have any parts or sketches you want to keep you can just delete those two directories and Fritzing will receate them, or you can move them aside by renaming them if you wan to keep something in them.
linux
~/Documents/Fritzing/parts
~/.config/Fritzing
Peter
↧
No part for Wemos D1 Mini PRO
When I tried to upgrade the Wemos D1 mini Pro then suddenly chrome keeps crashing and not opening at all so please help me to fix the problem so that I can work it with it again.
↧
Not working plz help
Im running Windows so I’ll give it a try
Edit: this is the first time using
↧