Wow thanks again men, you are best!
Lol i didn’t notice that 
sorry for that mistake. I will find the Datasheet to not damage that module when I use it. Thanks a lot Peter.
↧
Does somebody has the fritzing part for a 2S BMS?
↧
Producing PCB's from .dxf files
That is my experience too, I had thought a dxf file was like a .fzz file or a .brd file for eagle, but it appears to be closer to a svg, just the image with no interconnections or net which means it isn’t possible to make a part out of it very likely. To redo the boards in Fritzing would mean being able to find all the parts in use (and I don’t know what parts are in use.) I haven’t looked at Autocad in 30 or 40 years, but does it not have a board output format of some kind (other then dxf?) I would expect it to be a full EDA package by now, but perhaps not.
Peter
↧
↧
Does somebody has the fritzing part for a 2S BMS?
I think the drawing for the 3s version is more correct i.e. BM should go to the junction of the two cells with B- to the negative of the bottom cell and B+ to the positive of the top cell, but checking the chip datasheet to see what they think is safest (and around LIPO cells which tend to explode or burn when abused, you want to be very safe!)
Peter
↧
Does somebody has the fritzing part for a 2S BMS?
Ok, thanks for the tip, i will try not to explode something
One last thing, and sorry for bothering too much 
But i have look for this module fritzing part whitout any luck Do you have it? or somebody else?
https://www.amazon.com/Lithium-Battery-Capacity-Indicator-Electric/dp/B07GWR54SH
↧
Producing PCB's from .dxf files
I’ve made dozens of PCB’s without having Fritzing Part models (actually, perhaps 50 pcb’s).
Pretty simple: Knowing how many pads for a part (that Fritz doesn’t have), I simply use the Part called “Generic Female Header” set it to the number desired along with hole size.
Can do single, multiple… etc.
For the graphic aspect, I use a silkscreen part.
See my post: Make a Pretend Part
Once placed on the board, add traces!
↧
↧
Does somebody has the fritzing part for a 2S BMS?
You are always welcome to ask, if I don’t feel like doing it I will say so. Development is being particularly frustrating at the moment so you win (and this is a pretty trivial part again):
lithium-battery-indicator.fzpz (4.5 KB)
Peter
↧
Does somebody has the fritzing part for a 2S BMS?
Thank you so much Peter, you save me again!!
Ok, i will do it 
↧
Full bridge load cell
Transducer techniques has one. Called EBB - bending beam load cell.
I’d post a link but I might get banned, I’m new here.
I’m sure an admin will answer this. If you would like I will post it later.
Edit…Just realized how old the post is.
↧
Delete Account - Need Help Please
I would like to delete my account. Can someone help?
↧
↧
Delete Account - Need Help Please
Your best bet would probably be to make the request via the “contact us” link on the bottom of the login page. The admins do sometimes read the forums, but I expect the contact link will be faster.
Peter
↧
Full bridge load cell
As well, he was likely looking for a fritzing part for the load cell rather than the load cell itself, but welcome aboard any way!
Peter
↧
I need NodeMcu Amica
↧
I need NodeMcu Amica
Try the NodeMCU V1.0_fixed.fzpz in this post, it looks to be the one:
The difference between the various versions (that have the correct pin layout) is the width of the pins. This one is one of the .9in spacing models (which looks to be what you have.) There are also 1in and 1.1in variations. If you intend to make a pcb, before ordering boards you need to print out the footprint and check that the pin spacing, size of the hole (which can be obtained from the gerber drill.txt file) are 0.038in and the mounting holes are in the correct place (and present, many of the parts have mounting holes on silkscreen which will not get drilled unless you copy a hole in the sketch) for your particular board. If this doesn’t suit, post a link the the board that you have and I will have a look.
Peter
↧
↧
Any progress about the PDF Grey/White stripes Bug?
I would agree it shouldn’t influence the etching process but since it leaves lines in the pdf it affects mine. I am using version 0.9.3.
↧
Any progress about the PDF Grey/White stripes Bug?
My first suggestion is to upgrade to 0.9.4 (released about a month ago), the fix may or may not have made it in to there. If it still occurs then you need to report it as a bug on github here:
as a bug because it won’t be tracked (and may not be noticed) here in the forums. From a quick look, this fix may have made it in to the 0.9.4 release or it may not, as it appears to have perhaps have been merged as part of the major gerber rewrite which got backed out about 2 years ago (as parts of it were broken.) Unfortunately the folks who did that commit appear to have given up on Fritzing possibly because development and releases had died, and did not respond to requests for help to fix the code, so it got backed out. Development is trying to restart so there is some hope that this may get fixed if it is reported. It is possible this specific fix can be integrated independently of the larger fix (since it looked to be separate) if reported.
Peter
↧
Any progress about the PDF Grey/White stripes Bug?
↧
Hp printer printing blank pages
I have used Epson printer for 2 years then I brought Hp printer for extra office work.But when I am going to print my pages my hp printer printing blank pages.If anyone can please help me out.
↧
↧
KF-301 Relay Request
Hello to all,
looking for the fzpz file of the KF-301 module, I can’t find it, I always find the KY-019, or the KF301 connector. Also searching on google I don’t find, but I find images of schemes made with fritzing with that module as an image, someone can you help me find it please?
I can send image of the file I am looking for but as a new user do not make me attach
↧
KF-301 Relay Request
↧
KF-301 Relay Request
A google search for “fritzing part srd-o5” (the part number of the relay) turns up a variety of sources. Some are no longer available, but several are (there are a couple of posts here in the forum that may be suitable.) As well there is one in a project which can be obtained by going to
and right clicking to download the .fzz file. Load that in to Fritzing and in the temp parts bin is the relay part (which can be exported by right clicking on it and choosing export part.)
Peter
↧